
Shibaura SE8340
Power
83 hp
Production
unknown
Engine
Diesel, 4-cylinder
Transmission
Constant mesh
Weight
7800 lbs [3538 kg]
Drive
4WD
Introduction
Production Information of Shibaura, SE8340
The production information of the tractor (SE8340) includes details about its manufacturing.
| Utility tractor |
| Built in Matsumoto, Japan |
| Manufacturer | Shibaura |
|---|
Dimension and Tires Information of Shibaura, SE8340
This section sums up the dimension and tires information of the tractor.
| Ground clearance | 15.5 inches [39 cm] |
|---|---|
| Length | 153.9 inches [390 cm] |
| Weight | 7800 lbs [3538 kg] |
| Height (steering wheel) | 70.5 inches [179 cm] |
| Width | 74.4 inches [188 cm] |
| Front tread | 57 to 71.7 inches [144 to 182 cm] |
| Max weight | 16000 lbs [7257 kg] |
| Height | 107 inches [271 cm] |
| Rear tread | 56.9 to 76.6 inches [144 to 194 cm] |
| Ag front | 11.2x24 |
|---|---|
| Ag rear | 18.4x30 |
Engine Specifications of Shibaura, SE8340
Get the specifications for the engine and if different options are available.
| Shibaura LEA1104 |
| Liquid-cooled |
| Diesel |
| 4-cylinder |
| Torque | 202.8 lb-ft [275.0 Nm] |
|---|---|
| Displacement | 278.3 ci [4.6 L] |
| Compression | 17.1:1 |
| Bore/Stroke | 4.33x4.72 inches [110 x 120 mm] |
| Starter type | Electric |
| Torque RPM | 1500 |
| Operating RPM | 1500-2200 |
| Rated RPM | 2200 |
| Power | 83 hp [61.9 kW] |
Transmission Information of Shibaura, SE8340Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Constant mesh |
|---|---|
| Gears | 16 forward and 4 reverse |
| Clutch | Dry disc |
Mechanical Specs of Shibaura, SE8340Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Mechanical wet disc brakes |
| Two-post ROPS. Cab optional. |
Power Information of Shibaura, SE8340Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| 1000@2200 | |
| 800@2200 | |
| Rear PTO Type | 540 (1.375) |
| Engine RPM | 540@2200 |
Hydraulics Specifications of Shibaura, SE8340
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Pump flow | 9.3 gpm [35.2 lpm] |
| Capacity | 6.6 gal [25.0 L] |
| Valves | 1 to 3 |
Three-Point Hitch of Shibaura, SE8340
Hitch category and rear/front lift capacity.
| Rear Type | II |
|---|---|
| Control | Position and draft control |
| Rear lift (at ends) | 5512 lbs [2500 kg] |
Frequently asked questions
How much horsepower does the Shibaura SE8340 have?
The Shibaura SE8340 delivers 83 HP.
What years was the Shibaura SE8340 produced?
The Shibaura SE8340 was produced in unknown.
What engine does the Shibaura SE8340 have?
The Shibaura SE8340 is powered by a Diesel, 4-cylinder engine.
What transmission does the Shibaura SE8340 use?
The Shibaura SE8340 uses a Constant mesh transmission.
How much does the Shibaura SE8340 weigh?
The Shibaura SE8340 weighs 7800 lbs [3538 kg].
Is the Shibaura SE8340 4WD?
The Shibaura SE8340 is available in 4WD.