Steiger Bearcat
Power
225 hp
Production
1970-1974
Engine
Diesel, 8-cylinder
Transmission
Fuller
Weight
23000 lbs [10432 kg]
Drive
4WD
From the same series:
Introduction
Production Information of Steiger, Bearcat
The production information of the tractor (Bearcat) includes details about its manufacturing.
| Original price was $23,000 in 1973 |
| Four-wheel Drive (4WD) tractor |
| Built in Fargo, North Dakota, USA |
| Manufacturer | Steiger |
|---|
Dimension and Tires Information of Steiger, Bearcat
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 120 inches [304 cm] |
|---|---|
| Max weight | 23000 lbs [10432 kg] |
| Weight | 19600 lbs [8890 kg] |
| Length | 228 inches [579 cm] |
| Width | 93 inches*Width at the fenders. [236 cm] |
| Ag front | 18.4-30 |
|---|---|
| Ag rear | 23.1-26 |
| 28.1-26 | |
| Ag rear | 18.4-30 |
| 28.1-26 | |
| Ag front | 23.1-26 |
Engine Specifications of Steiger, Bearcat
Get the specifications for the engine and if different options are available.
| Caterpillar 3160 |
| Liquid-cooled V-8 |
| Diesel |
| 8-cylinder |
| Starter | Electric |
|---|---|
| Displacement | 636 ci [10.4 L] |
| Rated RPM | 2800 |
| Bore/Stroke | 4.50x5.00 inches [114 x 127 mm] |
| Coolant capacity | 42 qts [39.7 L] |
| Starter volts | 12 |
| Torque RPM | 1290 |
| Torque | 486 lb-ft [659.0 Nm] |
| Power | 225 hp [167.8 kW] |
Transmission Information of Steiger, BearcatY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Early literature states a model RT-910. Later literature shows a TA 4510. |
| Transmission | Fuller |
|---|---|
| Gears | 10 forward and 2 reverse |
| Clutch | 355.6mm dry discs |
Mechanical Specs of Steiger, BearcatY
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Cab standard with available air-conditioning. |
| Hydraulic disc brakes |
| Articulated power steering |
| Final drives | Planetary |
|---|
Power Information of Steiger, BearcatY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Engine | 225 hp [167.8 kW] |
|---|---|
| Drawbar (claimed) | 159 hp [118.6 kW] |
Hydraulics Specifications of Steiger, Bearcat
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Total flow | 38 gpm [143.8 lpm] |
| Pump flow | 21 gpm [79.5 lpm] |
| Capacity | 35 gal [132.5 L] |
| Steering flow | 17 gpm [64.3 lpm] |
| Valves | 3 |
Three-Point Hitch of Steiger, Bearcat
Hitch category and rear/front lift capacity.
| Rear Type | IV OptOptional |
|---|---|
| Rear lift | 8000 lbs [3628 kg] |
Electrical System of Steiger, Bearcat
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Charging system | Alternator |
| Charging amps | 55 |
Frequently asked questions
How much horsepower does the Steiger Bearcat have?
The Steiger Bearcat delivers 225 HP.
What years was the Steiger Bearcat produced?
The Steiger Bearcat was produced in 1970-1974.
What engine does the Steiger Bearcat have?
The Steiger Bearcat is powered by a Diesel, 8-cylinder engine.
What transmission does the Steiger Bearcat use?
The Steiger Bearcat uses a Fuller transmission.
How much does the Steiger Bearcat weigh?
The Steiger Bearcat weighs 23000 lbs [10432 kg].
Is the Steiger Bearcat 4WD?
The Steiger Bearcat is available in 4WD.