
Steiger Bearcat II ST-225
Power
210 hp
Production
1974-1976
Engine
Diesel, 8-cylinder
Transmission
Dana-Spicer ST-1010
Weight
21500 lbs [9752 kg]
Drive
4WD
From the same series:
Introduction
Production Information of Steiger, Bearcat II ST-225
The production information of the tractor (Bearcat II ST-225) includes details about its manufacturing.
| Original price was $37,000 in 1976 |
| Four-wheel Drive (4WD) tractor |
| Built in Fargo, North Dakota, USA |
| Manufacturer | Steiger |
|---|
Dimension and Tires Information of Steiger, Bearcat II ST-225
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 118 inches [299 cm] |
|---|---|
| Weight | 21500 lbs [9752 kg] |
| Length | 228 inches [579 cm] |
| Width | 96 inches*Overall with 23.1 tires. [243 cm] |
| 24.5-32 | |
| Ag front | 23.1-30 |
| 23.1-34 | |
| 20.8-34 | |
| Ag rear | 23.1-30 |
| Ag rear | 18.4-34 |
| 24.5-32 | |
| Ag front | 18.4-34 |
| 30.5-32 | |
| 23.1-34 | |
| 20.8-34 | |
| 30.5-32 |
Engine Specifications of Steiger, Bearcat II ST-225
Get the specifications for the engine and if different options are available.
| Caterpillar 3208 |
| Liquid-cooled |
| 8-cylinder |
| Diesel |
| Compression | 16.4:1 |
|---|---|
| Torque RPM | 1400 |
| Displacement | 636 ci [10.4 L] |
| Bore/Stroke | 4.50x5.00 inches [114 x 127 mm] |
| Power | 225 hp [167.8 kW] |
| Torque | 485 lb-ft [657.7 Nm] |
| Rated RPM | 2800 |
| Coolant capacity | 40 qts [37.9 L] |
| Coolant capacity | 40 qts [37.9 L] |
| Oil capacity | 12 qts [11.4 L] |
Transmission Information of Steiger, Bearcat II ST-225Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Fuller TA4510 used on the RC-200. |
| Transmission | Dana-Spicer ST-1010 |
|---|---|
| Clutch | 355.6mm cerametallic disc |
| Type | Gear |
| Gears | 10 forward and 2 reverse |
Mechanical Specs of Steiger, Bearcat II ST-225Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Cab standard with optional heat and air-conditioning. |
| Hydraulic disc brakes |
| Articulated power steering |
| Final drives | Outboard planetary |
|---|
Power Information of Steiger, Bearcat II ST-225Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Https://www.tractordata.com/farm-tractors/001/0/0/1007-steiger-bearcat-ii-st-225-tests.html |
Hydraulics Specifications of Steiger, Bearcat II ST-225
Hydraulic system type, pressure, pump flow and valves.
| Steering press. | 1500 psi [103.4 bar] |
|---|---|
| Type | Open center |
| Pump flow | 22 gpm [83.3 lpm] |
| Valves | 3 |
| Capacity | 30 gal [113.6 L] |
| Steering flow | 17.5 gpm [66.2 lpm] |
| Pressure | 2000 psi [137.9 bar] |
Three-Point Hitch of Steiger, Bearcat II ST-225
Hitch category and rear/front lift capacity.
| Rear Type | III OptOptional |
|---|
Electrical System of Steiger, Bearcat II ST-225
Battery voltage, charging system and ground.
| Charging system | Alternator |
|---|---|
| Battery volts | 12 |
| Charging amps | 55 (early) |
| 72 (late) |
Frequently asked questions
How much horsepower does the Steiger Bearcat II ST-225 have?
The Steiger Bearcat II ST-225 delivers 210 HP.
What years was the Steiger Bearcat II ST-225 produced?
The Steiger Bearcat II ST-225 was produced in 1974-1976.
What engine does the Steiger Bearcat II ST-225 have?
The Steiger Bearcat II ST-225 is powered by a Diesel, 8-cylinder engine.
What transmission does the Steiger Bearcat II ST-225 use?
The Steiger Bearcat II ST-225 uses a Dana-Spicer ST-1010 transmission.
How much does the Steiger Bearcat II ST-225 weigh?
The Steiger Bearcat II ST-225 weighs 21500 lbs [9752 kg].
Is the Steiger Bearcat II ST-225 4WD?
The Steiger Bearcat II ST-225 is available in 4WD.