
Steiger Wildcat III ST-210
Power
210 hp
Production
1976-1980
Transmission
Spicer SST 1010
Weight
18000 lbs [8164 kg]
Drive
4WD
From the same series:
Introduction
Production Information of Steiger, Wildcat III ST-210
The production information of the tractor (Wildcat III ST-210) includes details about its manufacturing.
| Four-wheel Drive (4WD) tractor |
| Built in Fargo, North Dakota, USA |
| Manufacturer | Steiger |
|---|
Dimension and Tires Information of Steiger, Wildcat III ST-210
This section sums up the dimension and tires information of the tractor.
| Raba 598 rear axle |
| Front axle | Raba 598 |
|---|---|
| Wheelbase | 118 inches [299 cm] |
| Shipping weight | 18000 lbs [8164 kg] |
| 95 inches*Fenders [241 cm] | |
| Length | 224 inches [568 cm] |
| Max weight | 23000 lbs [10432 kg] |
| Width | 44 inches*Frame [111 cm] |
| Rear tread | 65 to 90 inches [165 to 228 cm (RC-210)] |
| Front tread | 65 to 90 inches [165 to 228 cm (RC-210)] |
| 23.1-34 | |
| Ag front | 18.4-34 |
| 30.5-32 | |
| 24.5-32 | |
| Ag rear | 18.4-34 |
| Ag rear | 23.1-30 |
| 23.1-34 | |
| Ag front | 23.1-30 |
| 18.4-38 | |
| 30.5-32 | |
| 24.5-32 | |
| 18.4-38 |
Engine Specifications of Steiger, Wildcat III ST-210
Get the specifications for the engine and if different options are available.
| Liquid-cooled V-8 |
| Coolant capacity | 42 qts [39.7 L] |
|---|---|
| Starter volts | 12 |
| Fuel system | Direct injection |
| Oil change | 100 h |
| Idle RPM | 850-3000 |
| Rated RPM | 2800 |
| Displacement | 636 ci [10.4 L] |
| Oil capacity | 14 qts [13.2 L] |
| Power | 210 hp [156.6 kW] |
| Compression | 16.5:1 |
| Bore/Stroke | 4.50x5.00 inches [114 x 127 mm] |
| Starter | Electric |
| Torque RPM | 1400 |
| Torque | 485 lb-ft [657.7 Nm] |
Transmission Information of Steiger, Wildcat III ST-210Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Transmission | Spicer SST 1010 |
|---|---|
| Oil capacity | 50 qts [47.3 L] |
| Clutch | 355.6mm cerametallic disc |
| Type | Constant mesh |
| Gears | 10 forward and 2 reverse |
Mechanical Specs of Steiger, Wildcat III ST-210Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Safari Cab standard with air-conditioning. |
| Hydraulic disc brakes |
| Articulated power steering |
| Final drives | Planetary |
|---|
Power Information of Steiger, Wildcat III ST-210Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Https://www.tractordata.com/farm-tractors/001/0/1/1011-steiger-wildcat-iii-st-210-tests.html |
Hydraulics Specifications of Steiger, Wildcat III ST-210
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| SCV flow | 20 gpm [75.7 lpm] |
| Pump flow | 21.7 gpm [82.1 lpm] |
| Pressure | 2250 psi [155.1 bar] |
| Valves | 2 to 4 |
Three-Point Hitch of Steiger, Wildcat III ST-210
Hitch category and rear/front lift capacity.
| Rear Type | III OptOptional |
|---|---|
| Rear lift | 9500 lbs [4309 kg] |
Electrical System of Steiger, Wildcat III ST-210
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery AH | 208 |
| Battery volts | 12 |
| Charging system | Alternator |
| Battery Group | 8D |
| Charging amps | 72 |
Frequently asked questions
How much horsepower does the Steiger Wildcat III ST-210 have?
The Steiger Wildcat III ST-210 delivers 210 HP.
What years was the Steiger Wildcat III ST-210 produced?
The Steiger Wildcat III ST-210 was produced in 1976-1980.
What transmission does the Steiger Wildcat III ST-210 use?
The Steiger Wildcat III ST-210 uses a Spicer SST 1010 transmission.
How much does the Steiger Wildcat III ST-210 weigh?
The Steiger Wildcat III ST-210 weighs 18000 lbs [8164 kg].
Is the Steiger Wildcat III ST-210 4WD?
The Steiger Wildcat III ST-210 is available in 4WD.