
Steiger Panther III ST-320
Power
320 hp
Production
1976-1977
Engine
Turbocharged diesel, 8-cylinder
Transmission
Spicer SST 1010-2A
Weight
34000 lbs [15422 kg]
Drive
4WD
From the same series:
Introduction
Production Information of Steiger, Panther III ST-320
The production information of the tractor (Panther III ST-320) includes details about its manufacturing.
| Original price was $60,500 in 1977 |
| Four-wheel Drive (4WD) tractor |
| Built in Fargo, North Dakota, USA |
| Manufacturer | Steiger |
|---|
Dimension and Tires Information of Steiger, Panther III ST-320
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 128 inches [325 cm] |
|---|---|
| Ground clearance | 20 inches [50 cm] |
| Max weight | 34000 lbs [15422 kg] |
| Length | 252 inches [640 cm] |
| Weight | 26000 lbs [11793 kg] |
| Ag front | 24.5-32 |
|---|---|
| 30.5-32 | |
| 23.1-34 | |
| 18.4-38 | |
| 23.1-34 | |
| Ag front | 18.4-34 |
| 18.4-38 | |
| Ag rear | 18.4-34 |
| 20.8-34 | |
| Ag rear | 24.5-32 |
| 23.1-30 | |
| 30.5-32 | |
| 20.8-38 | |
| 23.1-30 | |
| 20.8-38 | |
| 20.8-34 |
Engine Specifications of Steiger, Panther III ST-320
Get the specifications for the engine and if different options are available.
| Cummins VT903 |
| Liquid-cooled V8 |
| Turbocharged diesel |
| 8-cylinder |
| Starter volts | 12 |
|---|---|
| Displacement | 903 ci [14.8 L] |
| Compression | 15.5:1 |
| Bore/Stroke | 5.50x4.75 inches [140 x 121 mm] |
| Starter | Electric |
| Rated RPM | 2600 |
| Power | 320 hp [238.6 kW] |
Transmission Information of Steiger, Panther III ST-320Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Transmission | Spicer SST 1010-2A |
|---|---|
| Gears | 20 forward and 4 reverse |
Mechanical Specs of Steiger, Panther III ST-320Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Safari Cab |
| Articulated power steering |
| Final drives | Outboard planetary |
|---|
Power Information of Steiger, Panther III ST-320Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Https://www.tractordata.com/farm-tractors/001/0/1/1019-steiger-panther-iii-st-320-tests.html |
Hydraulics Specifications of Steiger, Panther III ST-320
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Valves | 4 |
| Steering press. | 2100 psi [144.8 bar] |
Three-Point Hitch of Steiger, Panther III ST-320
Hitch category and rear/front lift capacity.
| Rear Type | III OptOptional |
|---|
Electrical System of Steiger, Panther III ST-320
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Batteries | 2 |
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the Steiger Panther III ST-320 have?
The Steiger Panther III ST-320 delivers 320 HP.
What years was the Steiger Panther III ST-320 produced?
The Steiger Panther III ST-320 was produced in 1976-1977.
What engine does the Steiger Panther III ST-320 have?
The Steiger Panther III ST-320 is powered by a Turbocharged diesel, 8-cylinder engine.
What transmission does the Steiger Panther III ST-320 use?
The Steiger Panther III ST-320 uses a Spicer SST 1010-2A transmission.
How much does the Steiger Panther III ST-320 weigh?
The Steiger Panther III ST-320 weighs 34000 lbs [15422 kg].
Is the Steiger Panther III ST-320 4WD?
The Steiger Panther III ST-320 is available in 4WD.