Introduction
Production Information of Valmet, 355
The production information of the tractor (355) includes details about its manufacturing.
| Utility tractor |
| Manufacturer | Valmet |
|---|
Dimension and Tires Information of Valmet, 355
This section sums up the dimension and tires information of the tractor.
| 4WD Clearance (front axle) | 16 inches [40 cm] |
|---|---|
| 2WD Wheelbase | 83.2 inches [211 cm] |
| Width | 79.9 inches [202 cm] |
| 4WD Length | 151.6 inches [385 cm] |
| 4WD Wheelbase | 88.8 inches [225 cm] |
| 2WD Clearance (front axle) | 19.9 inches [50 cm] |
| 2WD Length | 146.1 inches [371 cm] |
| 2WD Standard tires (ag) | Front: 10.00-16. Rear: 16.9-30 |
|---|---|
| 4WD Optional tires (ag) | Front: 11.2R24. Rear: 13.6R36 |
| 4WD Optional tires (ag) | Front: 11.2-24. Rear: 13.6-36 |
| 4WD Standard tires (ag) | Front: 11.2-24. Rear: 16.9-30 |
| 4WD Optional tires (ag) | Front: 11.2-24. Rear: 16.9-30 |
Engine Specifications of Valmet, 355
Get the specifications for the engine and if different options are available.
| Valmet TD33D |
| Liquid-cooled |
| 3-cylinder |
| Diesel |
| Air cleaner | Dry |
|---|---|
| Rated RPM | 2350 |
| Displacement | 201.4 ci [3.3 L] |
| Bore/Stroke | 4.252x4.724 inches [108 x 120 mm] |
| Power | 61 hp [45.5 kW] |
| Compression | 17:1 |
| Pre-heating | Intake air heater |
| Starter volts | 12 |
| Torque RPM | 1400 |
| Torque | 162.3 lb-ft [220.1 Nm] |
Transmission Information of Valmet, 355Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Four gears (1-4) in two ranges (low/high) plus reverse range. |
| Type | Synchromesh |
|---|---|
| Gears | 8 forward and 4 reverse |
| Clutch | 280mm dry disc |
Transmission variants 2
| Creeper range provides an additional four gears forward and reverse. |
| Type | Creeper |
|---|---|
| Gears | 12 forward and 8 reverse |
| Clutch | 280mm dry disc |
| 8-speed synchromesh |
| 12-speed creeper |
Mechanical Specs of Valmet, 355Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| Cab standard. |
| Wet disc brakes |
| Power steering |
| Differential lock | Mechanical rear |
|---|
Power Information of Valmet, 355Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540 (1.375) |
| Engine RPM | 540@1890 |
Hydraulics Specifications of Valmet, 355
Hydraulic system type, pressure, pump flow and valves.
| Pump flow | 10.3 gpm [39.0 lpm] |
|---|
Three-Point Hitch of Valmet, 355
Hitch category and rear/front lift capacity.
| Rear lift | 5,512 lbs [2500 kg] |
|---|
Electrical System of Valmet, 355
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Charging system | Alternator |
| Charging amps | 45 |
Frequently asked questions
How much horsepower does the Valmet 355 have?
The Valmet 355 delivers 61 HP.
What years was the Valmet 355 produced?
The Valmet 355 was produced in 1990-1994.
What engine does the Valmet 355 have?
The Valmet 355 is powered by a Diesel, 3-cylinder engine.
What transmission does the Valmet 355 use?
The Valmet 355 uses a Synchromesh transmission.
Is the Valmet 355 4WD?
The Valmet 355 is available in 2WD/4WD.