Introduction
Production Information of Valmet, 702S
The production information of the tractor (702S) includes details about its manufacturing.
| Row-Crop tractor |
| Manufacturer | Valmet |
|---|
Dimension and Tires Information of Valmet, 702S
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 88.2 inches [224 cm] |
|---|---|
| Height (exhaust) | 101 inches [256 cm] |
| Height | 98.4 inches [249 cm] |
| Length | 150.4 inches [382 cm] |
| Weight | 8907 lbs [4040 kg] |
| Width | 78.7 inches [199 cm] |
| Ag front | 7.50-18 |
|---|---|
| 18.4-34 (4WD) | |
| 13.6-28 (4WD) | |
| Ag rear | 13.6-38 |
Engine Specifications of Valmet, 702S
Get the specifications for the engine and if different options are available.
| Valmet 411 BS 72 |
| Liquid-cooled |
| Turbocharged diesel |
| 4-cylinder |
| Starter | Electric |
|---|---|
| Displacement | 255.1 ci [4.2 L] |
| Rated RPM | 2200 |
| Bore/Stroke | 4.252x4.488 inches [108 x 114 mm] |
| Starter volts | 12 |
| Torque RPM | 1200 |
| Torque | 193.1 lb-ft [261.8 Nm] |
| Power | 75 hp [55.9 kW] |
Transmission Information of Valmet, 702SY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Four gears (1-4) plus reverse (R) in two ranges (low/high). |
| Type | Synchromesh |
|---|---|
| Gears | 8 forward and 2 reverse |
| Clutch | 310mm dry disc |
Transmission variants 2
| Transmission | Hi-Trac |
|---|---|
| Type | Two-speed power shift |
| Gears | 16 forward and 4 reverse |
| 8-speed synchromesh |
| 16-speed two-speed power shift |
Mechanical Specs of Valmet, 702SY
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| Power steering |
| Cab standard with heater. |
Power Information of Valmet, 702SY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO Type | 540 |
|---|---|
| 1000@2143 | |
| 540/1000 OptOptional | |
| Engine RPM | 540@1556 |
Hydraulics Specifications of Valmet, 702S
Hydraulic system type, pressure, pump flow and valves.
| Pump flow | 6.9 gpm [26.1 lpm] |
|---|
Three-Point Hitch of Valmet, 702S
Hitch category and rear/front lift capacity.
| Rear lift | 4,674 lbs [2120 kg] |
|---|
Frequently asked questions
How much horsepower does the Valmet 702S have?
The Valmet 702S delivers 75 HP.
What years was the Valmet 702S produced?
The Valmet 702S was produced in 1974-1979.
What engine does the Valmet 702S have?
The Valmet 702S is powered by a Turbocharged diesel, 4-cylinder engine.
What transmission does the Valmet 702S use?
The Valmet 702S uses a Synchromesh transmission.
How much does the Valmet 702S weigh?
The Valmet 702S weighs 8907 lbs [4040 kg].
Is the Valmet 702S 4WD?
The Valmet 702S is available in 2WD/4WD.