Allis Chalmers 810GT
Power
10 hp
Production
1976-1978
Engine
Gasoline, 1-cylinder
Transmission
Belt-driven gear
Weight
590 lbs*Weight with 42-inch mower deck. [267 kg]
Drive
2WD
From the same series:
Introduction
Allis Chalmers 810GT Garden Tractor
The Allis Chalmers 810GT is a compact garden tractor produced between 1976 and 1978 in Port Washington, Wisconsin, USA. It belongs to the 800GT series and was designed primarily for residential lawn maintenance and light garden tasks.
Engine and Powertrain
The tractor is powered by a 10 horsepower (7.5 kW) Briggs & Stratton gasoline engine. This single-cylinder, air-cooled unit features a vertical-shaft configuration and operates at a rated speed of 3600 RPM. The machine utilizes a belt-driven gear transmission providing three forward gears and one reverse gear. It is equipped with a 12-volt electrical system and an electric starter.
Chassis and Controls
Built on a two-wheel drive chassis, the 810GT features manual steering and mechanical band brakes. The operator station is of the open type. With a wheelbase of 45.5 inches (115 cm) and a total width of 33.5 inches (85 cm), the tractor is designed for maneuverability in confined spaces. It weighs approximately 590 lbs (267 kg) when equipped with a 42-inch mower deck.
Attachments and PTO
The tractor is equipped with an independent mid-mounted power take-off (PTO). The engagement of the PTO and attachments is managed via a mechanical idler pulley clutch system. It is compatible with 36-inch or 42-inch mower decks, depending on the specific configuration.
Conclusion
The Allis Chalmers 810GT is a straightforward, utility-focused garden tractor. Given its mechanical simplicity, 10 hp power output, and compact dimensions, it is well-suited for homeowners managing medium-sized lawns and requiring a reliable platform for mowing operations.
Production Information of Allis Chalmers, 810GT
- Original price was $1,600
- Garden tractor
- Built in Port Washington, Wisconsin, USA
| Manufacturer | Allis Chalmers |
|---|
Dimension and Tires Information of Allis Chalmers, 810GT
| Wheelbase | 45.5 inches [115 cm] |
|---|---|
| Weight | 590 lbs [267 kg] |
| Height (steering wheel) | 42 inches [106 cm] |
| Length | 64.5 inches [163 cm] |
| Width | 33.5 inches [85 cm] |
Weight with 42-inch mower deck.
| Lawn/turf front | 15-6.00x6 |
|---|---|
| Lawn/turf rear | 20-8x10 |
Engine Specifications of Allis Chalmers, 810GT
- Briggs & Stratton
- Air-cooled vertical-shaft
- Gasoline
- 1-cylinder
| Starter | Electric |
|---|---|
| Power (gross) | 10 hp [7.5 kW] |
| Starter volts | 12 |
| Rated RPM | 3600 |
Transmission Information of Allis Chalmers, 810GT
Transmission variants 1
| Type | Belt-driven gear |
|---|---|
| Gears | 3 forward and 1 reverse |
Mechanical Specs of Allis Chalmers, 810GT
- Two-wheel drive
- Open operator station.
- Manual steering
- Mechanical band brakes
Power Information of Allis Chalmers, 810GT
| Mid PTO | Independent |
|---|---|
| Clutch | Mechanical idler pulley |
Electrical System of Allis Chalmers, 810GT
| Ground | Negative |
|---|---|
| Battery volts | 12 |
Where it sits
With 10 HP, the Allis Chalmers 810GT sits between 808GT (8 HP) and 811GT (11 HP) in Allis Chalmers's range. Its power puts it in the 64th percentile of 1970s models in our database (1008 machines).
Frequently asked questions
How much horsepower does the Allis Chalmers 810GT have?
The Allis Chalmers 810GT delivers 10 HP.
What years was the Allis Chalmers 810GT produced?
The Allis Chalmers 810GT was produced in 1976-1978.
What engine does the Allis Chalmers 810GT have?
The Allis Chalmers 810GT is powered by a Gasoline, 1-cylinder engine.
What transmission does the Allis Chalmers 810GT use?
The Allis Chalmers 810GT uses a Belt-driven gear transmission.
How much does the Allis Chalmers 810GT weigh?
The Allis Chalmers 810GT weighs 590 lbs*Weight with 42-inch mower deck. [267 kg].
Is the Allis Chalmers 810GT 4WD?
The Allis Chalmers 810GT is available in 2WD.