Allis Chalmers 910
Power
10 hp
Production
1980
Engine
Gasoline, 1-cylinder
Transmission
Belt-driven gear
Drive
2WD
From the same series:
Introduction
Allis Chalmers 910 Garden Tractor
The Allis Chalmers 910 is a garden tractor produced in 1980 at the Port Washington, Wisconsin facility in the United States. Part of the 912 series, this machine is designed for residential property maintenance and landscaping tasks.
Engine and Power
The tractor is powered by a single-cylinder, air-cooled gasoline engine with a horizontal shaft. It delivers 10 hp (7.5 kW) and features a displacement of 391 cc (23.9 ci). The engine is equipped with a dry-type air cleaner and utilizes a 12-volt electric starter system.
Transmission and Chassis
The transmission uses a belt-driven gear system providing 6 forward and 2 reverse gears. The chassis is configured with two-wheel drive and manual steering. The operator operates from an open station. The electrical system includes a 12-volt battery and a flywheel alternator capable of 15 charging amps.
Dimensions and Equipment
The 910 has a wheelbase of 50.7 inches (128 cm) and an overall length of 70 inches (177 cm). It is fitted with lawn and turf tires, with 16x6.50-8 front tires and 23x8.50-12 rear tires. The machine supports a 42-inch or 48-inch mower deck and offers an optional sleeve hitch for additional implements.
Conclusion
The Allis Chalmers 910 serves as a reliable, compact solution for property owners requiring a versatile machine for mowing and light ground-engaging tasks, characterized by its straightforward mechanical design and standard garden tractor configurations.
Production Information of Allis Chalmers, 910
- Garden tractor
- Built in Port Washington, Wisconsin, USA
| Manufacturer | Allis Chalmers |
|---|
Dimension and Tires Information of Allis Chalmers, 910
| Rear tread | 27 inches [68 cm] |
|---|---|
| Wheelbase | 50.7 inches [128 cm] |
| Height (hood) | 35.7 inches [90 cm] |
| Height (steering wheel) | 39.7 inches [100 cm] |
| Length | 70 inches [177 cm] |
| Front tread | 30 inches [76 cm] |
| Width | 36.9 inches [93 cm] |
| Lawn/turf front | 16x6.50-8 |
|---|---|
| Lawn/turf rear | 23x8.50-12 |
Engine Specifications of Allis Chalmers, 910
- Air-cooled horizontal-shaft
- Gasoline
- 1-cylinder
| Power | 10 hp [7.5 kW] |
|---|---|
| Displacement | 391 cc [23.9 ci] |
| Air cleaner | Dry |
| Bore/Stroke | 3.25x2.875 inches [83 x 73 mm] |
| Starter volts | 12 |
| Starter | Electric |
Transmission Information of Allis Chalmers, 910
Transmission variants 1
| Type | Belt-driven gear |
|---|---|
| Gears | 6 forward and 2 reverse |
| Oil capacity | 2.25 qts [2.1 L] |
Transmission variants 2
Mechanical Specs of Allis Chalmers, 910
- Two-wheel drive
- Manual steering
- Open operator station.
Three-Point Hitch of Allis Chalmers, 910
| Type(optional) | Sleeve hitch |
|---|
Electrical System of Allis Chalmers, 910
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Charging system | Flywheel alternator |
| Charging amps | 15 |
Where it sits
With 10 HP, the Allis Chalmers 910 sits just below 912 (12 HP) in Allis Chalmers's range. Its power puts it in the 25th percentile of 1980s models in our database (977 machines).
Frequently asked questions
How much horsepower does the Allis Chalmers 910 have?
The Allis Chalmers 910 delivers 10 HP.
What years was the Allis Chalmers 910 produced?
The Allis Chalmers 910 was produced in 1980.
What engine does the Allis Chalmers 910 have?
The Allis Chalmers 910 is powered by a Gasoline, 1-cylinder engine.
What transmission does the Allis Chalmers 910 use?
The Allis Chalmers 910 uses a Belt-driven gear transmission.
Is the Allis Chalmers 910 4WD?
The Allis Chalmers 910 is available in 2WD.