Allis Chalmers 710
Power
10 hp
Production
1974-1979
Transmission
Belt-driven gear
Weight
750 lbs [340 kg]
Drive
2WD
From the same series:
Introduction
Allis Chalmers 710 Garden Tractor
The Allis Chalmers 710 is a garden tractor produced between 1974 and 1979 in Port Washington, Wisconsin, USA. Part of the 712 series, this model was designed for residential lawn maintenance and light utility work.
Engine and Powertrain
The tractor is equipped with a 10 hp (7.5 kW) air-cooled horizontal-shaft engine with a displacement of 391 cc (23.9 ci). It utilizes a dry air cleaner and an electric starter powered by a 12-volt, 45 Ah battery. The engine oil capacity is 2 quarts (1.9 L), with maintenance intervals recommended every 25 hours of operation.
Transmission and Controls
Power is delivered through a belt-driven gear transmission. Early production units (1974–1976) feature a 3-forward and 1-reverse gear configuration, while later versions (1977–1979) offer a 6-forward and 2-reverse setup. The machine utilizes a manual clutch and mechanical manual steering for operation.
Chassis and Dimensions
Built on a two-wheel-drive chassis, the tractor features drum brakes and an open operator station. It has a wheelbase of 48.1 inches (122 cm) and a total length of 67 inches (170 cm). With a weight of 750 lbs (340 kg), it is fitted with 4.80x4.00-8 front tires and 23x8.50-12 rear tires designed for lawn and turf applications.
Attachments and PTO
The tractor is equipped with an independent mid-power take-off (PTO) operated via a manual clutch. It includes a sleeve hitch for attaching implements, and the machine was commonly configured with a 42-inch mower deck.
Conclusion
The Allis Chalmers 710 is a compact, gear-driven garden tractor suited for residential lawn care and light property maintenance. Its straightforward mechanical design and availability of multiple gear configurations make it a representative model of late 1970s American garden equipment.
Production Information of Allis Chalmers, 710
- Original price was $2,250 in 1979
- Garden tractor
- Built in Port Washington, Wisconsin, USA
| Manufacturer | Allis Chalmers |
|---|
Dimension and Tires Information of Allis Chalmers, 710
| Front tread | 30 inches [76 cm] |
|---|---|
| Wheelbase | 48.1 inches [122 cm] |
| Weight | 750 lbs [340 kg] |
| Height | 39.3 inches [99 cm] |
| Length | 67 inches [170 cm] |
| Rear tread | 27 inches [68 cm] |
| Ground clearance | 8 inches [20 cm] |
| Width | 37.5 inches [95 cm] |
| Lawn/turf front | 4.80x4.00-8 |
|---|---|
| Lawn/turf rear | 23x8.50-12 |
Engine Specifications of Allis Chalmers, 710
- Air-cooled horizontal-shaft
| Starter volts | 12 |
|---|---|
| Displacement | 391 cc [23.9 ci] |
| Oil capacity | 2 qts [1.9 L] |
| Air cleaner | Dry |
| Bore/Stroke | 3.25x2.88 inches [83 x 73 mm] |
| Oil change | 25 h |
| Starter | Electric |
| Rated RPM | 3600 |
| Power | 10 hp [7.5 kW] |
Transmission Information of Allis Chalmers, 710
Transmission variants 1
- The three-speed version was built from 1974 through 1976.
| Type | Belt-driven gear |
|---|---|
| Gears | 3 forward and 1 reverse |
Transmission variants 2
- The six-speed Allis 710 was built from 1977 through 1979.
| Type | Belt-driven gear |
|---|---|
| Gears | 6 forward and 2 reverse |
- 3-speed gear
- 6-speed gear
Mechanical Specs of Allis Chalmers, 710
- Two-wheel drive
- Open operator station.
- Manual steering
- Drum brakes
Power Information of Allis Chalmers, 710
| Mid PTO | Independent |
|---|---|
| Clutch | Manual |
Three-Point Hitch of Allis Chalmers, 710
| Type(optional) | Sleeve hitch |
|---|
Electrical System of Allis Chalmers, 710
| Ground | Negative |
|---|---|
| Battery AH | 45 |
| Battery volts | 12 |
| Charging system | Flywheel alternator |
| Charging amps | 15 |
Where it sits
With 10 HP, the Allis Chalmers 710 sits just below 712 (12 HP) in Allis Chalmers's range. Its power puts it in the 64th percentile of 1970s models in our database (1008 machines).
Frequently asked questions
How much horsepower does the Allis Chalmers 710 have?
The Allis Chalmers 710 delivers 10 HP.
What years was the Allis Chalmers 710 produced?
The Allis Chalmers 710 was produced in 1974-1979.
What transmission does the Allis Chalmers 710 use?
The Allis Chalmers 710 uses a Belt-driven gear transmission.
How much does the Allis Chalmers 710 weigh?
The Allis Chalmers 710 weighs 750 lbs [340 kg].
Is the Allis Chalmers 710 4WD?
The Allis Chalmers 710 is available in 2WD.