Cub Cadet 1000
Power
10 hp
Production
1974-1980
Transmission
Shaft-driven gear
Weight
630 lbs [285 kg]
Drive
2WD
From the same series:
Introduction
Cub Cadet 1000 Garden Tractor
The Cub Cadet 1000 is a garden tractor produced by International Harvester in Louisville, Kentucky, between 1974 and 1980. Designed for residential lawn care and light utility tasks, this two-wheel-drive machine is part of the broader Cub Cadet series, known for its mechanical simplicity and robust construction.
Engine and Performance
The tractor is powered by a 389 cc air-cooled engine producing 10 horsepower (7.5 kW). It utilizes a Kohler side-draft carburetor and a dry-type air cleaner. The engine is rated at 3400 RPM for standard operation, with an idle range between 1800 and 3600 RPM. Routine maintenance requires an oil capacity of 2.4 liters, with recommended changes every 30 operating hours.
Transmission and Drivetrain
The drivetrain features a shaft-driven gear transmission. The base model offers three forward gears and one reverse gear, while an optional creeper range increases this to six forward and two reverse gears, controlled by a separate lever. Both configurations use a 4.5-inch dry disc clutch, and the tractor must be fully stopped to shift gears.
Electrical and PTO Systems
The electrical system operates on 12 volts, supported by a flywheel alternator providing 15 charging amps. The tractor is equipped with both front and rear power take-off (PTO) capabilities. The rear PTO is transmission-driven at 515 RPM, while the front PTO operates independently at 3400 RPM. Both systems utilize an electric clutch for engagement.
Chassis and Dimensions
Built on a 44-inch wheelbase, the tractor has a total length of 175 cm and a width of 83 cm. The shipping weight is approximately 285 kg, providing stability for its class. It features manual steering and dry disc brakes. The machine is compatible with 38, 44, or 50-inch mower decks and includes a sleeve hitch for attaching various implements.
Conclusion
The Cub Cadet 1000 is a straightforward, mechanically driven tractor designed for homeowners and light-duty garden maintenance. Its combination of a reliable air-cooled engine, versatile transmission options, and compatibility with a range of mower decks makes it a functional tool for grass management and small-scale property work.
Production Information of Cub Cadet, 1000
- Garden tractor
- Built in Louisville, Kentucky, USA
| Manufacturer | Cub Cadet (a part of International Harvester) |
|---|
Dimension and Tires Information of Cub Cadet, 1000
| Front tread | 27 inches [68 cm] |
|---|---|
| Wheelbase | 44 inches [111 cm] |
| Shipping weight | 630 lbs [285 kg] |
| Height (steering wheel) | 41 inches [104 cm] |
| Length | 69 inches [175 cm] |
| Rear tread | 27 inches [68 cm] |
| Ground clearance | 6 inches [15 cm] |
| Width | 33 inches [83 cm] |
| Lawn/turf front | 4.80/4.00-8 |
|---|---|
| Lawn/turf rear | 6-12 |
Engine Specifications of Cub Cadet, 1000
- Air-cooled
| Intake valve clearance | 0.010 inches [0.254 mm] |
|---|---|
| Point gap | 0.020 inches [0.508 mm] |
| Fuel system | Kohler side-draft carburetor |
| Exhaust valve clearance | 0.020 inches [0.508 mm] |
| Rated RPM | 3400 |
| Idle RPM | 1800-3600 |
| Air cleaner | Dry |
| Displacement | 389 cc [23.76 ci] |
| Power (gross) | 10 hp [7.5 kW] |
| Oil capacity | 2.5 qts [2.4 L] |
| Oil change | 30 h |
| Bore/Stroke | 3.25x2.875 inches [83 x 73 mm] |
| Sparkplug gap | 0.035 inches [0.889 mm] |
| Sparkplug | Champion H-10 |
| Starter volts | 12 |
Cold
Cold
Transmission Information of Cub Cadet, 1000
Transmission variants 1
- Tractor must be stopped, and clutch used, to shift gears.
| Type | Shaft-driven gear |
|---|---|
| Oil capacity | 4 qts [3.8 L] |
| Gears | 3 forward and 1 reverse |
| Clutch | 4.5-inch dry disc |
Transmission variants 2
- Adds a creeper range to the basic transmission. Creeper engaged by separate control lever.
| Type | Creeper |
|---|---|
| Oil capacity | 4.25 qts [4.0 L] |
| Gears | 6 forward and 2 reverse |
| Clutch | 4.5-inch dry disc |
- 3-speed gear
- 6-speed creeper
Mechanical Specs of Cub Cadet, 1000
- Two-wheel drive
- Open operator station.
| Steering | Manual |
|---|---|
| Brakes | Dry disc |
Power Information of Cub Cadet, 1000
| Rear PTO | Transmission |
|---|---|
| Front PTO Type | 3400 |
| Clutch | Electric |
| Rear PTO Type | 515 (0.937) |
| Front PTO | Independent |
Three-Point Hitch of Cub Cadet, 1000
| Type(optional) | Sleeve hitch |
|---|
Electrical System of Cub Cadet, 1000
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Charging system | Flywheel alternator |
| Charging amps | 15 |
Where it sits
With 10 HP, the Cub Cadet 1000 sits between 800 (8 HP) and 1100 (11 HP) in Cub Cadet's range. Its power puts it in the 64th percentile of 1970s models in our database (1008 machines).
Frequently asked questions
How much horsepower does the Cub Cadet 1000 have?
The Cub Cadet 1000 delivers 10 HP.
What years was the Cub Cadet 1000 produced?
The Cub Cadet 1000 was produced in 1974-1980.
What transmission does the Cub Cadet 1000 use?
The Cub Cadet 1000 uses a Shaft-driven gear transmission.
How much does the Cub Cadet 1000 weigh?
The Cub Cadet 1000 weighs 630 lbs [285 kg].
Is the Cub Cadet 1000 4WD?
The Cub Cadet 1000 is available in 2WD.