Cub Cadet 104
Power
10 hp
Production
1967-1969
Transmission
Shaft-driven gear
Weight
605 lbs [274 kg]
Drive
2WD
From the same series:
Introduction
Production Information of Cub Cadet, 104
The production information of the tractor (104) includes details about its manufacturing.
| Garden tractor |
| Built in Louisville, Kentucky, USA |
| Manufacturer | Cub Cadet (a part of International Harvester) |
|---|
Dimension and Tires Information of Cub Cadet, 104
This section sums up the dimension and tires information of the tractor.
| Rear tread | 27 inches [68 cm] |
|---|---|
| Wheelbase | 43 inches [109 cm] |
| Weight | 605 lbs [274 kg] |
| Height (steering wheel) | 39.75 inches [100 cm] |
| Length | 64 inches [162 cm] |
| Ground clearance | 6 inches [15 cm] |
| Width | 33.25 inches [84 cm] |
| Lawn/turf front | 4.80x4.00-8 |
|---|---|
| Lawn/turf rear | 6-12 |
Engine Specifications of Cub Cadet, 104
Get the specifications for the engine and if different options are available.
| Air-cooled |
| Exhaust valve clearance | 0.020 inches (cold) [0.508 mm] |
|---|---|
| Rated RPM | 3600 |
| Idle RPM | 1000-3800 |
| Sparkplug | Champion H-10 |
| Starter volts | 12 |
| Displacement | 391 cc [23.9 ci] |
| Oil capacity | 1.5 qts [1.4 L] |
| Power | 10 hp [7.5 kW] |
| Oil change | 30 h |
| Bore/Stroke | 3.25x2.875 inches [83 x 73 mm] |
| Intake valve clearance | 0.010 inches (cold) [0.254 mm] |
| Point gap | 0.020 inches [0.508 mm] |
| Sparkplug gap | 0.025 inches [0.635 mm] |
Transmission Information of Cub Cadet, 104Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Three-speed transmission operated by gear shift lever and combination clutch/brake pedal. Tractor must be stopped, and clutch used, to shift. |
| Type | Shaft-driven gear |
|---|---|
| Oil capacity | 3.5 qts [3.3 L] |
| Gears | 3 forward and 1 reverse |
| Clutch | 4.5-inch dry disc |
Transmission variants 2
| 3 | Gear shift |
|---|---|
| 1 | Clutch/brake |
| 2 | Throttle |
Transmission variants 3
| Optional creeper adds an additional low range to the base transmission. Creeper drive is engaged when creeper shift lever is pulled to the rear. |
| Type | Creeper |
|---|---|
| Gears | 6 forward and 2 reverse |
| Clutch | 4.5-inch dry disc |
| 3-speed gear |
| 6-speed creeper |
Mechanical Specs of Cub Cadet, 104Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Open operator station with vinyl-padded fiberglass seat. |
| Dry disc brakes |
| Steering | Manual |
|---|
Power Information of Cub Cadet, 104Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Transmission |
|---|---|
| Clutch | Mechanical |
| Front PTO | Independent |
| Clutch | Dry disc |
| Front PTO Type | 3600 |
| Rear PTO Type | 525 |
Hydraulics Specifications of Cub Cadet, 104
Hydraulic system type, pressure, pump flow and valves.
| Type | Optional |
|---|---|
| Pressure | 400 psi [27.6 bar] |
| Pump flow | 2.5 gpm [9.5 lpm] |
Three-Point Hitch of Cub Cadet, 104
Hitch category and rear/front lift capacity.
| Type | Cub Cadet three-point |
|---|
Electrical System of Cub Cadet, 104
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Charging system | Generator |
| Charging amps | 15 |
Frequently asked questions
How much horsepower does the Cub Cadet 104 have?
The Cub Cadet 104 delivers 10 HP.
What years was the Cub Cadet 104 produced?
The Cub Cadet 104 was produced in 1967-1969.
What transmission does the Cub Cadet 104 use?
The Cub Cadet 104 uses a Shaft-driven gear transmission.
How much does the Cub Cadet 104 weigh?
The Cub Cadet 104 weighs 605 lbs [274 kg].
Is the Cub Cadet 104 4WD?
The Cub Cadet 104 is available in 2WD.