Cub Cadet 124
Power
12 hp
Production
1967-1969
Transmission
Shaft-driven gear
Weight
630 lbs [285 kg]
Drive
2WD
From the same series:
Introduction
Cub Cadet 124 Garden Tractor
The Cub Cadet 124 is a garden tractor produced by the International Harvester subsidiary between 1967 and 1969. Manufactured in Louisville, Kentucky, this model was designed for residential lawn care and light agricultural tasks, offering a balance of mechanical simplicity and operational versatility.
Engine and Performance
The tractor is powered by an air-cooled, single-cylinder engine producing 12 hp (8.9 kW). It features a 479 cc displacement with a bore and stroke of 86 x 83 mm. The engine is designed to operate at a rated speed of 3600 RPM, with an idle range between 1000 and 3800 RPM. Routine maintenance includes oil changes every 30 hours, with an oil capacity of 1.4 liters.
Transmission and Drivetrain
The base model is equipped with a shaft-driven, three-speed gear transmission providing three forward and one reverse gear. A 4.5-inch dry disc clutch is utilized for engagement. An optional creeper drive is available, which expands the transmission to six forward and two reverse gears, providing lower ground speeds for specialized tasks. The system requires the tractor to be fully stopped before shifting gears.
Hydraulics and PTO
The 124 features both front and rear power take-off (PTO) capabilities. The front PTO is independent and rated at 3600 RPM, while the rear PTO operates at 525 RPM. An optional hydraulic system is available, delivering a pump flow of 9.5 liters per minute (2.5 gpm) at a pressure of 27.6 bar (400 psi).
Chassis and Operator Station
The tractor is built on a two-wheel-drive chassis with manual steering and dry disc brakes. The operator station is of an open design, featuring a vinyl-padded fiberglass seat. With a wheelbase of 109 cm and a total weight of 285 kg, the unit is designed for maneuverability. It is compatible with 38, 42, and 48-inch mower decks and utilizes a Cub Cadet three-point hitch system.
Conclusion
The Cub Cadet 124 is a durable, utility-focused garden tractor suited for homeowners and collectors requiring a reliable machine for mowing and light implements. Its mechanical configuration, particularly the optional creeper transmission, provides adaptability for various terrain conditions.
Production Information of Cub Cadet, 124
- Garden tractor
- Built in Louisville, Kentucky, USA
| Manufacturer | Cub Cadet (a part of International Harvester) |
|---|
Dimension and Tires Information of Cub Cadet, 124
| Rear tread | 27 inches [68 cm] |
|---|---|
| Wheelbase | 43 inches [109 cm] |
| Weight | 630 lbs [285 kg] |
| Height (steering wheel) | 39.75 inches [100 cm] |
| Length | 64 inches [162 cm] |
| Ground clearance | 6 inches [15 cm] |
| Width | 36 inches [91 cm] |
| Lawn/turf front | 4.80x4.00-8 |
|---|---|
| Lawn/turf rear | 23x8.50-12 |
Engine Specifications of Cub Cadet, 124
- Air-cooled
| Exhaust valve clearance | 0.020 inches (cold) [0.508 mm] |
|---|---|
| Rated RPM | 3600 |
| Idle RPM | 1000-3800 |
| Sparkplug | Champion H-10 |
| Starter volts | 12 |
| Displacement | 479 cc [29.25 ci] |
| Oil capacity | 1.5 qts [1.4 L] |
| Power | 12 hp [8.9 kW] |
| Oil change | 30 h |
| Bore/Stroke | 3.385x3.25 inches [86 x 83 mm] |
| Intake valve clearance | 0.010 inches (cold) [0.254 mm] |
| Point gap | 0.020 inches [0.508 mm] |
| Sparkplug gap | 0.025 inches [0.635 mm] |
Transmission Information of Cub Cadet, 124
Transmission variants 1
- Three-speed transmission operated by gear shift lever and combination clutch/brake pedal. Tractor must be stopped, and clutch used, to shift.
| Type | Shaft-driven gear |
|---|---|
| Oil capacity | 3.5 qts [3.3 L] |
| Gears | 3 forward and 1 reverse |
| Clutch | 4.5-inch dry disc |
Transmission variants 2
- Optional creeper adds an additional low range to the base transmission. Creeper drive is engaged when creeper shift lever is pulled to the rear.
| Type | Creeper |
|---|---|
| Gears | 6 forward and 2 reverse |
| Clutch | 4.5-inch dry disc |
- 3-speed gear
- 6-speed creeper
Mechanical Specs of Cub Cadet, 124
- Two-wheel drive
- Open operator station with vinyl-padded fiberglass seat.
- Dry disc brakes
| Steering | Manual |
|---|
Power Information of Cub Cadet, 124
| Rear PTO | Transmission |
|---|---|
| Clutch | Mechanical |
| Front PTO | Independent |
| Clutch | Dry disc |
| Front PTO Type | 3600 |
| Rear PTO Type | 525 |
Hydraulics Specifications of Cub Cadet, 124
| Type | Optional |
|---|---|
| Pressure | 400 psi [27.6 bar] |
| Pump flow | 2.5 gpm [9.5 lpm] |
Three-Point Hitch of Cub Cadet, 124
| Type | Cub Cadet three-point |
|---|
Electrical System of Cub Cadet, 124
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Charging system | Generator |
| Charging amps | 15 |
Where it sits
With 12 HP, the Cub Cadet 124 sits just above 105 (10 HP) in Cub Cadet's range. Its power puts it in the 97th percentile of 1960s models in our database (550 machines).
Frequently asked questions
How much horsepower does the Cub Cadet 124 have?
The Cub Cadet 124 delivers 12 HP.
What years was the Cub Cadet 124 produced?
The Cub Cadet 124 was produced in 1967-1969.
What transmission does the Cub Cadet 124 use?
The Cub Cadet 124 uses a Shaft-driven gear transmission.
How much does the Cub Cadet 124 weigh?
The Cub Cadet 124 weighs 630 lbs [285 kg].
Is the Cub Cadet 124 4WD?
The Cub Cadet 124 is available in 2WD.