Cub Cadet 125
Power
12 hp
Production
1967-1969
Transmission
Shaft-driven hydrostatic
Weight
650 lbs [294 kg]
Drive
2WD
From the same series:
Introduction
Production Information of Cub Cadet, 125
The production information of the tractor (125) includes details about its manufacturing.
| Garden tractor |
| Built in Louisville, Kentucky, USA |
| Manufacturer | Cub Cadet (a part of International Harvester) |
|---|
Dimension and Tires Information of Cub Cadet, 125
This section sums up the dimension and tires information of the tractor.
| Rear tread | 27 inches [68 cm] |
|---|---|
| Wheelbase | 43 inches [109 cm] |
| Weight | 650 lbs [294 kg] |
| Height (steering wheel) | 39.75 inches [100 cm] |
| Length | 64 inches [162 cm] |
| Ground clearance | 6 inches [15 cm] |
| Width | 36 inches [91 cm] |
| Lawn/turf front | 4.80x4.00-8 |
|---|---|
| Lawn/turf rear | 23x8.50-12 |
Engine Specifications of Cub Cadet, 125
Get the specifications for the engine and if different options are available.
| Air-cooled |
| Exhaust valve clearance | 0.020 inches (cold) [0.508 mm] |
|---|---|
| Rated RPM | 3600 |
| Idle RPM | 1000-3800 |
| Sparkplug | Champion H-10 |
| Starter volts | 12 |
| Displacement | 479 cc [29.25 ci] |
| Oil capacity | 1.5 qts [1.4 L] |
| Power | 12 hp [8.9 kW] |
| Oil change | 30 h |
| Bore/Stroke | 3.385x3.25 inches [86 x 83 mm] |
| Intake valve clearance | 0.010 inches (cold) [0.254 mm] |
| Point gap | 0.020 inches [0.508 mm] |
| Sparkplug gap | 0.025 inches [0.635 mm] |
Transmission Information of Cub Cadet, 125Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Manufacturer | Sundstrand |
|---|---|
| Oil capacity | 7 qts [6.6 L] |
| Type | Shaft-driven hydrostatic |
| Gears | Infinite forward and reverse |
Mechanical Specs of Cub Cadet, 125Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Open operator station with vinyl-padded fiberglass seat. |
| Drum brakes |
| Steering | Manual |
|---|
Power Information of Cub Cadet, 125Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Front PTO | Independent |
|---|---|
| Clutch | Mechanical |
| Front PTO Type | 3600 |
Hydraulics Specifications of Cub Cadet, 125
Hydraulic system type, pressure, pump flow and valves.
| Type | Optional |
|---|---|
| Pressure | 400 psi [27.6 bar] |
| Pump flow | 2.5 gpm [9.5 lpm] |
Three-Point Hitch of Cub Cadet, 125
Hitch category and rear/front lift capacity.
| Type | Cub Cadet three-point |
|---|
Electrical System of Cub Cadet, 125
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Charging system | Generator |
| Charging amps | 15 |
Frequently asked questions
How much horsepower does the Cub Cadet 125 have?
The Cub Cadet 125 delivers 12 HP.
What years was the Cub Cadet 125 produced?
The Cub Cadet 125 was produced in 1967-1969.
What transmission does the Cub Cadet 125 use?
The Cub Cadet 125 uses a Shaft-driven hydrostatic transmission.
How much does the Cub Cadet 125 weigh?
The Cub Cadet 125 weighs 650 lbs [294 kg].
Is the Cub Cadet 125 4WD?
The Cub Cadet 125 is available in 2WD.