Cub Cadet LT1050 lawn tractor

Cub Cadet LT1050

Power

25 hp

Production

2005-2008

Transmission

Hydro-Gear 0510

Weight

548 lbs*Weight with mower deck. [248 kg]

Drive

2WD

From the same series:

LT1046

Introduction

Cub Cadet LT1050 Lawn Tractor

The Cub Cadet LT1050 is a lawn tractor manufactured between 2005 and 2008, designed for residential lawn maintenance and groundskeeping tasks.

Engine and Performance

The machine is powered by a 724 cc air-cooled vertical-shaft V-twin engine, producing a gross power output of 25 hp (18.6 kW). It operates at a rated speed of 3600 RPM and delivers 38 lb-ft (51.5 Nm) of torque at 2800 RPM. Maintenance requirements include an oil capacity of 2.1 quarts (2.0 L), with recommended oil changes every 100 hours.

Drivetrain and Transmission

The LT1050 utilizes a belt-driven Hydro-Gear 0510 hydrostatic transmission, which provides the operator with infinite forward and reverse speed control without the need for traditional gear shifting. The tractor features two-wheel drive and is equipped with dry disc brakes for deceleration.

Mowing and Operational Systems

Equipped with a 50-inch mower deck, the tractor uses an independent mid-mounted Power Take-Off (PTO) system engaged via an electric clutch. The operator station is of the open design, utilizing manual steering for directional control.

Electrical and Dimensions

The electrical system operates on 12 volts, supported by a battery providing 235 cold cranking amps (CCA) and a 15-amp charging system. Physically, the unit measures 172 cm in length, 137 cm in width, and 109 cm in height, with a wheelbase of 116 cm. It weighs approximately 248 kg including the mower deck and features lawn/turf tires measuring 15x6-6 in the front and 20x10-8 in the rear.

Conclusion

The Cub Cadet LT1050 is a standard lawn tractor configuration suitable for property maintenance, offering a balance of engine power and hydrostatic maneuverability for residential mowing applications.

Production Information of Cub Cadet, LT1050

  • Lawn tractor
ManufacturerCub Cadet (a part of MTD)

Dimension and Tires Information of Cub Cadet, LT1050

Wheelbase46 inches [116 cm]
Weight548 lbs [248 kg]
Height43 inches [109 cm]
Length68 inches [172 cm]
Ground clearance4.5 inches [11 cm]
Width54 inches [137 cm]

Weight with mower deck.

Lawn/turf front15x6-6
Lawn/turf rear20x10-8

Engine Specifications of Cub Cadet, LT1050

  • Air-cooled vertical-shaft V-twin
Sparkplug gap0.030 inches [0.762 mm]
SparkplugChampion RC12YC
Compression9.0:1
Oil change100 h
Torque38 lb-ft [51.5 Nm]
Idle RPM1200-3600
Displacement724 cc [44.2 ci]
Oil capacity2.1 qts [2.0 L]
Power (gross)25 hp [18.6 kW]
Rated RPM3600
Bore/Stroke3.27x2.64 inches [83 x 67 mm]
Starter volts12
StarterElectric
Torque RPM2800

Transmission Information of Cub Cadet, LT1050

Transmission variants 1

TransmissionHydro-Gear 0510
TypeBelt-driven hydrostatic
GearsInfinite forward and reverse

Mechanical Specs of Cub Cadet, LT1050

  • Two-wheel drive
  • Open operator station.
  • Manual steering
  • Dry disc brakes

Power Information of Cub Cadet, LT1050

Mid PTOIndependent
ClutchElectric

Electrical System of Cub Cadet, LT1050

GroundNegative
Battery volts12
Battery CCA235
Charging systemAlternator
Charging amps15

Where it sits

With 25 HP, the Cub Cadet LT1050 sits just above LT1046 (23 HP) in Cub Cadet's range. Its power puts it in the 89th percentile of 2000s models in our database (1174 machines).

Frequently asked questions

How much horsepower does the Cub Cadet LT1050 have?

The Cub Cadet LT1050 delivers 25 HP.

What years was the Cub Cadet LT1050 produced?

The Cub Cadet LT1050 was produced in 2005-2008.

What transmission does the Cub Cadet LT1050 use?

The Cub Cadet LT1050 uses a Hydro-Gear 0510 transmission.

How much does the Cub Cadet LT1050 weigh?

The Cub Cadet LT1050 weighs 548 lbs*Weight with mower deck. [248 kg].

Is the Cub Cadet LT1050 4WD?

The Cub Cadet LT1050 is available in 2WD.

Compare the Cub Cadet LT1050 with another model