John Deere 110 lawn tractor

John Deere 110

Power

7 hp

Production

1963-1974

Transmission

Belt-driven gear with mechanical CVT

Weight

502 lbs [227 kg]

Drive

2WD

From the same series:

112

Introduction

Production Information of John Deere, 110

The production information of the tractor (110) includes details about its manufacturing.

The "10" in the John Deere 110 model name did not refer to the tractor's horsepower, but was keeping in line with the New Generation tractor models (1010, 2010, 3010, 4010).
Garden tractor
Built in Horicon, Wisconsin, USA
ManufacturerJohn Deere

Dimension and Tires Information of John Deere, 110

This section sums up the dimension and tires information of the tractor.

Front tread30 inches [76 cm (R3)]
Wheelbase44 inches [111 cm]
Weight502 lbs [227 kg]
Height38.75 inches [98 cm]
Length63 inches [160 cm]
Rear tread27/33 inches [68/83 cm]
Front tread29 inches [73 cm (R1)]
Width34.5 inches*Minimum [87 cm]
Ag front4.80/4.00-8
Lawn/turf rear8-12
Ag rear6-12
Lawn/turf front16x6.50-8

Engine Specifications of John Deere, 110

Get the specifications for the engine and if different options are available.

Air-cooled horizontal-shaft
The 8-horsepower Kohler K181 replaced the K161 for the 1964 model year.
Intake valve clearance0.007 inches*Cold [0.178 mm]
Point gap0.020 inches [0.508 mm]
Power8 hp [6.0 kW]
Exhaust valve clearance0.016 inches*Cold [0.406 mm]
Compression6.8:1
Rated RPM3600
Air cleanerDry
Bore/Stroke2.9375x2.75 inches [75 x 70 mm]
Oil capacity1 qts [0.9 L]
Oil change25 h
Displacement305 cc [18.64 ci]
Sparkplug gap0.025 inches [0.635 mm]
Starter volts12
Idle RPM1200-3800

Transmission Information of John Deere, 110Y

Discover all variants of transmission available for this tractor model.

Transmission variants 1

ManufacturerPeerless
Oil change200 h
Oil capacity1 qts [0.9 L]
TypeBelt-driven gear with mechanical CVT
Gears3 forward and 1 reverse

Transmission variants 2

4Gear shift
3Variator lever
1Clutch-Brake pedal
5Parking brake
2Throttle

Transmission variants 3

The transmission features four forward gears plus reverse, with a variable speed control. The clutch is used to shift between gears. Once in gear, the variable speed lever adjusts the drive ratio to provide a range of speeds that can be adjusted on the move.
TransmissionPeerless 2300
Oil change200 h
Oil capacity1.5 qts [1.4 L]
TypeBelt-driven gear with mechanical CVT
Gears4 forward and 1 reverse

Transmission variants 4

4Gear shift
3Variator lever
1Clutch-Brake pedal
5Parking brake
2Throttle
3-speed gear with mechanical CVT
4-speed gear with mechanical CVT

Mechanical Specs of John Deere, 110Y

This section summarizes all mechanical information such as the brake system and other specifications.

Two-wheel drive
Open operator station.
Manual steering
Manual brakes

Power Information of John Deere, 110Y

Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.

Mid PTOIndependent
ClutchManual idler pulley

Three-Point Hitch of John Deere, 110

Hitch category and rear/front lift capacity.

TypeSleeve hitch OptOptional

Electrical System of John Deere, 110

Battery voltage, charging system and ground.

GroundNegative
Battery volts12
Battery AH24

Frequently asked questions

How much horsepower does the John Deere 110 have?

The John Deere 110 delivers 7 HP.

What years was the John Deere 110 produced?

The John Deere 110 was produced in 1963-1974.

What transmission does the John Deere 110 use?

The John Deere 110 uses a Belt-driven gear with mechanical CVT transmission.

How much does the John Deere 110 weigh?

The John Deere 110 weighs 502 lbs [227 kg].

Is the John Deere 110 4WD?

The John Deere 110 is available in 2WD.

Compare the John Deere 110 with another model