John Deere 112
Power
10 hp
Production
1966-1974
Transmission
Peerless 2300
Weight
591 lbs [268 kg]
Drive
2WD
From the same series:
Introduction
John Deere 112 Garden Tractor
The John Deere 112 is a garden tractor produced in Horicon, Wisconsin, USA, between 1966 and 1974. It was designed as a versatile machine for property maintenance and lawn care tasks during the mid-to-late 20th century.
Engine and Power
The tractor is equipped with an air-cooled, horizontal-shaft engine producing 10 horsepower (7.5 kW). It features a displacement of 388 cc with a bore and stroke of 3.3125 by 2.75 inches. The engine operates at a rated speed of 3600 RPM, with an idle range between 1200 and 3800 RPM. Maintenance requirements include an oil change interval of 25 hours.
Transmission and Drive
The unit utilizes a Peerless 2300 transmission, providing four forward gears and one reverse gear. This gear-based system incorporates a variable pulley drive, allowing the operator to adjust speeds on-the-move using a right-hand variator lever. The transmission oil capacity is 1.5 quarts (1.4 liters) with a recommended change interval of 200 hours.
Mechanical and Dimensions
Built on a two-wheel-drive chassis, the machine features manual steering and an open operator station. It has a wheelbase of 44 inches (111 cm) and an overall length of 63 inches (160 cm). The tractor weighs 591 lbs (268 kg) and is equipped with lawn and turf tires, specifically 16x6.50-8 on the front and 8-12 on the rear.
Conclusion
The John Deere 112 is a robust, compact garden tractor suitable for residential lawn maintenance and light landscaping. Its ability to accommodate 38-inch or 46-inch mower decks, combined with a manual variator-controlled transmission, provides the necessary flexibility for varying terrain and mowing conditions.
Production Information of John Deere, 112
- Garden tractor
- Built in Horicon, Wisconsin, USA
| Manufacturer | John Deere |
|---|
Dimension and Tires Information of John Deere, 112
| Rear tread | 27/33 inches [68/83 cm] |
|---|---|
| Wheelbase | 44 inches [111 cm] |
| Weight | 591 lbs [268 kg] |
| Height | 38.75 inches [98 cm] |
| Length | 63 inches [160 cm] |
| Front tread | 30 inches [76 cm] |
| Width | 37 inches [93 cm] |
| Lawn/turf front | 16x6.50-8 |
|---|---|
| Lawn/turf rear | 8-12 |
Engine Specifications of John Deere, 112
- Air-cooled horizontal-shaft
- Image courtesy of Ben Copenhaver
| Power | 10 hp [7.5 kW] |
|---|---|
| Displacement | 388 cc [23.7 ci] |
| Rated RPM | 3600 |
| Bore/Stroke | 3.3125x2.75 inches [84 x 70 mm] |
| Oil change | 25 h |
| Starter volts | 12 |
| Idle RPM | 1200-3800 |
Transmission Information of John Deere, 112
Transmission variants 1
- Four-speed gear shift with reverse using the combination brake-clutch foot pedal. Right-hand Variator lever allows on-the-move adjustment within a range of speeds for each gear.
| Transmission | Peerless 2300 |
|---|---|
| Oil change | 200 h |
| Oil capacity | 1.5 qts [1.4 L] |
| Type | Gear with variable pulley drive |
| Gears | 4 forward and 1 reverse |
Mechanical Specs of John Deere, 112
- Two-wheel drive
- Manual steering
- Open operator station.
Hydraulics Specifications of John Deere, 112
| Capacity | 1.25 gal [4.7 L] |
|---|
Electrical System of John Deere, 112
| Ground | Negative |
|---|---|
| Battery volts | 12 |
Where it sits
With 10 HP, the John Deere 112 sits between 110 (7 HP) and 212 (12 HP) in John Deere's range. Its power puts it in the 87th percentile of 1960s models in our database (550 machines).
Frequently asked questions
How much horsepower does the John Deere 112 have?
The John Deere 112 delivers 10 HP.
What years was the John Deere 112 produced?
The John Deere 112 was produced in 1966-1974.
What transmission does the John Deere 112 use?
The John Deere 112 uses a Peerless 2300 transmission.
How much does the John Deere 112 weigh?
The John Deere 112 weighs 591 lbs [268 kg].
Is the John Deere 112 4WD?
The John Deere 112 is available in 2WD.