John Deere X116R
Power
10 hp
Production
2018-2020
Engine
Gasoline, 1-cylinder
Transmission
Tuff Torq K46
Weight
496 lbs [224 kg]
Drive
2WD
From the same series:
Introduction
John Deere X116R Lawn Tractor
The John Deere X116R is a residential lawn tractor produced between 2018 and 2020. Manufactured in Greeneville, Tennessee, this machine is specifically engineered for lawn maintenance tasks, featuring a rear-discharge mower configuration.
Engine and Performance
The tractor is powered by a Briggs & Stratton 21R877, a single-cylinder, air-cooled gasoline engine. It features a displacement of 339 cc (20.74 ci) with a bore/stroke of 3.44 x 2.26 inches. The engine delivers 10.2 hp (7.6 kW) and utilizes an electric starter. The oil capacity for the unit is 1.5 quarts (1.4 liters).
Transmission and Drivetrain
The X116R utilizes a Tuff Torq K46 belt-driven hydrostatic transmission. This system provides infinite forward and reverse speeds without the need for manual gear shifting, allowing for precise control during operation. The tractor is configured as a two-wheel-drive vehicle.
Mowing and Controls
The model is equipped with a 36-inch mower deck designed for rear discharge. The power take-off (PTO) is independent and located at the mid-section, engaged via a manual clutch mechanism, providing the operator with direct control over the mowing deck engagement.
Physical Specifications
The tractor has a wheelbase of 48.3 inches (122 cm) and an overall length of 96.9 inches (246 cm), with a width of 42.5 inches (107 cm). It weighs approximately 496 lbs (224 kg). It rides on lawn and turf tires, with 15x6.00-6 tires in the front and 18x8.5-8 tires in the rear.
Conclusion
The John Deere X116R is a compact and maneuverable tractor designed for homeowners. Its combination of a hydrostatic transmission, manual steering, and a 36-inch rear-discharge deck makes it a suitable solution for routine residential lawn care and maintenance.
Production Information of John Deere, X116R
- Rear-discharge mower
- Built in Greeneville, Tennessee, USA
| Manufacturer | John Deere |
|---|
Dimension and Tires Information of John Deere, X116R
| Wheelbase | 48.3 inches [122 cm] |
|---|---|
| Weight | 496 lbs [224 kg] |
| Length | 96.9 inches [246 cm] |
| Width | 42.5 inches [107 cm] |
| Lawn/turf front | 15x6.00-6 |
|---|---|
| Lawn/turf rear | 18x8.5-8 |
Engine Specifications of John Deere, X116R
- Briggs & Stratton 21R877
- Air-cooled vertical-shaft
- Gasoline
- 1-cylinder
| Power | 10.2 hp [7.6 kW] |
|---|---|
| Displacement | 339 cc [20.74 ci] |
| Starter | Electric |
| Bore/Stroke | 3.44x2.26 inches [87 x 57 mm] |
| Oil capacity | 1.5 qts [1.4 L] |
| Starter volts | 12 |
Transmission Information of John Deere, X116R
Transmission variants 1
| Transmission | Tuff Torq K46 |
|---|---|
| Type | Belt-driven hydrostatic |
| Gears | Infinite forward and reverse |
Mechanical Specs of John Deere, X116R
- Two-wheel drive
- Manual steering
- Open operator station.
Power Information of John Deere, X116R
| Mid PTO | Independent |
|---|---|
| Clutch | Manual |
Electrical System of John Deere, X116R
| Ground | Negative |
|---|---|
| Battery Group | U1 |
| Charging amps | 9 |
| Battery volts | 12 |
Where it sits
With 10 HP, the John Deere X116R sits just below X117R (14 HP) in John Deere's range. Its power puts it in the 1th percentile of 2010s models in our database (783 machines).
Frequently asked questions
How much horsepower does the John Deere X116R have?
The John Deere X116R delivers 10 HP.
What years was the John Deere X116R produced?
The John Deere X116R was produced in 2018-2020.
What engine does the John Deere X116R have?
The John Deere X116R is powered by a Gasoline, 1-cylinder engine.
What transmission does the John Deere X116R use?
The John Deere X116R uses a Tuff Torq K46 transmission.
How much does the John Deere X116R weigh?
The John Deere X116R weighs 496 lbs [224 kg].
Is the John Deere X116R 4WD?
The John Deere X116R is available in 2WD.