Introduction
John Deere X167 Lawn Tractor
The John Deere X167 is a lawn tractor manufactured since 2021 in Greeneville, Tennessee, USA. Designed for residential property maintenance, this machine is part of the manufacturer's series of lawn tractors, offering specific capabilities for grass cutting and landscaping tasks.
Engine and Powertrain
The tractor is powered by a Briggs & Stratton 44N677 air-cooled V-Twin gasoline engine. This 724 cc (44.2 ci) two-cylinder engine produces 20.1 hp (15.0 kW). It utilizes an electric starter and requires a sparkplug gap of 0.030 inches. The engine oil capacity is 2.8 quarts (2.6 L), with maintenance intervals for oil changes specified at 50 hours.
Transmission and Drive System
The X167 features a Tuff Torq K46 belt-driven hydrostatic transmission, providing infinite forward and reverse speed control. The unit is sealed and not intended for owner maintenance. The tractor operates with a two-wheel drive system and manual steering. It is equipped with 16x6.5-8 front and 22x9.5-12 rear lawn and turf tires.
PTO and Mowing Equipment
The machine includes an independent mid-mounted Power Take-Off (PTO) system, which is engaged via an electric clutch. This setup is designed to operate the included 48-inch mower deck efficiently.
Electrical and Dimensions
The electrical system operates on 12 volts, supported by a battery group U1 and a 9-amp charging system. The tractor measures 75.6 inches in length, 51.6 inches in width, and 44.9 inches in height, with a total weight of 503 lbs (228 kg). The operator station is of the open type.
Conclusion
The John Deere X167 is a robust lawn tractor intended for homeowners who require a reliable machine for mowing and basic grounds maintenance. Its hydrostatic transmission and 48-inch deck make it suitable for consistent performance in residential lawn care environments.
Production Information of John Deere, X167
- Lawn tractor
- Built in Greeneville, Tennessee, USA
| Manufacturer | John Deere |
|---|
Dimension and Tires Information of John Deere, X167
| Length | 75.6 inches [192 cm] |
|---|---|
| Weight | 503 lbs [228 kg] |
| Width | 51.6 inches [131 cm] |
| Height | 44.9 inches [114 cm] |
| Lawn/turf front | 16x6.5-8 |
|---|---|
| Lawn/turf rear | 22x9.5-12 |
Engine Specifications of John Deere, X167
- Briggs & Stratton 44N677
- Air-cooled vertical-shaft V-Twin
- Gasoline
- 2-cylinder
| Oil change | 50 h |
|---|---|
| Displacement | 724 cc [44.2 ci] |
| Starter | Electric |
| Bore/Stroke | 3.12x2.89 inches [79 x 73 mm] |
| Sparkplug gap | 0.030 inches [0.762 mm] |
| Oil capacity | 2.8 qts [2.6 L] |
| Starter volts | 12 |
| Power | 20.1 hp [15.0 kW] |
Transmission Information of John Deere, X167
Transmission variants 1
| Transmission | Tuff Torq K46 |
|---|---|
| Oil change | Sealed unit, owner service is not recommended |
| Type | Belt-driven hydrostatic |
| Gears | Infinite forward and reverse |
Mechanical Specs of John Deere, X167
- Two-wheel drive
- Manual steering
- Open operator station.
Power Information of John Deere, X167
| Mid PTO | Independent |
|---|---|
| Clutch | Electric |
Electrical System of John Deere, X167
| Ground | Negative |
|---|---|
| Battery Group | U1 |
| Charging amps | 9 |
| Battery volts | 12 |
Where it sits
With 20 HP, the John Deere X167 sits just above X166 (18 HP) in John Deere's range. Its power puts it in the 24th percentile of 2020s models in our database (330 machines).
Frequently asked questions
How much horsepower does the John Deere X167 have?
The John Deere X167 delivers 20 HP.
What years was the John Deere X167 produced?
The John Deere X167 was produced in 2021+.
What engine does the John Deere X167 have?
The John Deere X167 is powered by a Gasoline, 2-cylinder engine.
What transmission does the John Deere X167 use?
The John Deere X167 uses a Tuff Torq K46 transmission.
How much does the John Deere X167 weigh?
The John Deere X167 weighs 503 lbs [228 kg].
Is the John Deere X167 4WD?
The John Deere X167 is available in 2WD.