Introduction
Production Information of Snapper lawn tractors, 1855
The production information of the tractor (1855) includes details about its manufacturing.
| Garden tractor |
| Built in Fort Worth, Texas, USA |
| Manufacturer | Snapper |
|---|
Dimension and Tires Information of Snapper lawn tractors, 1855
This section sums up the dimension and tires information of the tractor.
| Front axle | Steel |
|---|---|
| Wheelbase | 52 inches [132 cm] |
| 1855 Weight | 860 lbs [390 kg] |
| Height (steering wheel) | 48 inches [121 cm] |
| Length | 78 inches [198 cm] |
| Front tread | 32 inches [81 cm] |
| 1855A Weight | 950 lbs [430 kg] |
| Width | 45.5 inches [115 cm] |
| Rear tread | 33.5 inches [85 cm] |
| Lawn/turf front | 18x8.50-8 |
|---|---|
| Lawn/turf rear | 23x12.00-12 |
Engine Specifications of Snapper lawn tractors, 1855
Get the specifications for the engine and if different options are available.
| Onan B48M |
| Air-cooled horizontal-shaft opposed-twin |
| Gasoline |
| 2-cylinder |
| Power (gross) | 18 hp [13.4 kW] |
|---|---|
| Displacement | 781 cc [47.7 ci] |
| Starter | Electric |
| Bore/Stroke | 3.25x2.875 inches [83 x 73 mm] |
| Oil capacity | 2 qts [1.9 L] |
| Starter volts | 12 |
Transmission Information of Snapper lawn tractors, 1855Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Transmission | Eaton 11 |
|---|---|
| Oil capacity | 5 qts [4.7 L] |
| Type | Belt-driven hydrostatic |
| Gears | Infinite forward and reverse (2-range) |
Mechanical Specs of Snapper lawn tractors, 1855Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Open operator station. |
| Manual steering |
| Disc brakes |
Power Information of Snapper lawn tractors, 1855Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent OptOptional |
|---|---|
| Clutch | Electric |
| Rear PTO Type | 2000 |
| Front PTO | Independent |
Three-Point Hitch of Snapper lawn tractors, 1855
Hitch category and rear/front lift capacity.
| Rear Type | 0 OptOptional |
|---|---|
| Rear lift (at ends) | 650 lbs [294 kg] |
Electrical System of Snapper lawn tractors, 1855
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the Snapper lawn tractors 1855 have?
The Snapper lawn tractors 1855 delivers 18 HP.
What years was the Snapper lawn tractors 1855 produced?
The Snapper lawn tractors 1855 was produced in 1979-1984.
What engine does the Snapper lawn tractors 1855 have?
The Snapper lawn tractors 1855 is powered by a Gasoline, 2-cylinder engine.
What transmission does the Snapper lawn tractors 1855 use?
The Snapper lawn tractors 1855 uses a Eaton 11 transmission.
How much does the Snapper lawn tractors 1855 weigh?
The Snapper lawn tractors 1855 weighs 860 lbs [390 kg].
Is the Snapper lawn tractors 1855 4WD?
The Snapper lawn tractors 1855 is available in 2WD.
