Introduction
Snapper HYT18 Garden Tractor
The Snapper HYT18 is a garden tractor produced in 1989, designed for residential lawn maintenance and versatile property management tasks.
Engine and Powertrain
The tractor is powered by a Kohler M18 gasoline engine. This 691 cc, 2-cylinder, air-cooled unit features a horizontal shaft and produces 18 horsepower (13.4 kW). It utilizes a 12-volt electric starter system. Power is delivered through an Eaton 850 hydrostatic transmission, which provides infinite forward and reverse speed control, allowing for precise maneuvering.
Mechanical Configuration
The chassis is built on a two-wheel drive platform with manual steering and an open operator station. The front axle is constructed from cast iron for increased durability. The machine measures 173 cm in length, 97 cm in width, and has a height of 111 cm to the steering wheel.
Equipment and Versatility
The HYT18 is equipped with an independent front PTO (Power Take-Off) utilizing a pulley-type drive and an electric clutch for engagement. It supports various mower decks, specifically 33-inch, 41-inch, and 48-inch models. Additionally, a sleeve hitch is available as an optional attachment for towing or mounting implements.
Conclusion
The Snapper HYT18 is a robust garden tractor suited for landowners requiring a dependable machine for mowing and light utility work. Its hydrostatic transmission and independent front PTO make it a practical choice for varied landscaping applications.
Production Information of Snapper lawn tractors, HYT18
- Garden tractor
| Manufacturer | Snapper |
|---|
Dimension and Tires Information of Snapper lawn tractors, HYT18
| Length | 68.25 inches [173 cm] |
|---|---|
| Front axle | Cast-iron |
| Width | 38.5 inches [97 cm] |
| Height (steering wheel) | 44 inches [111 cm] |
| Lawn/turf front | 15x6.00-6 |
|---|---|
| Lawn/turf rear | 23x10.5-12 |
| Lawn/turf front | 21x7.00-10 (HYT1833) |
Engine Specifications of Snapper lawn tractors, HYT18
- Kohler M18
- Air-cooled horizontal-shaft
- Gasoline
- 2-cylinder
| Power (gross) | 18 hp [13.4 kW] |
|---|---|
| Displacement | 691 cc [42.18 ci] |
| Starter | Electric |
| Bore/Stroke | 3.125x2.75 inches [79 x 70 mm] |
| Starter volts | 12 |
Transmission Information of Snapper lawn tractors, HYT18
Transmission variants 1
| Transmission | Eaton 850 |
|---|---|
| Type | Shaft-driven hydrostatic |
| Gears | Infinite forward and reverse |
Mechanical Specs of Snapper lawn tractors, HYT18
- Two-wheel drive
- Manual steering
- Open operator station.
Power Information of Snapper lawn tractors, HYT18
| Front PTO | Independent |
|---|---|
| Clutch | Electric |
| Front PTO Type | Pulley |
Three-Point Hitch of Snapper lawn tractors, HYT18
| Type(optional) | Sleeve hitch |
|---|
Electrical System of Snapper lawn tractors, HYT18
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Battery AH | 20 |
Where it sits
Its power puts it in the 93th percentile of 1980s models in our database (977 machines).
Frequently asked questions
How much horsepower does the Snapper lawn tractors HYT18 have?
The Snapper lawn tractors HYT18 delivers 18 HP.
What years was the Snapper lawn tractors HYT18 produced?
The Snapper lawn tractors HYT18 was produced in 1989.
What engine does the Snapper lawn tractors HYT18 have?
The Snapper lawn tractors HYT18 is powered by a Gasoline, 2-cylinder engine.
What transmission does the Snapper lawn tractors HYT18 use?
The Snapper lawn tractors HYT18 uses a Eaton 850 transmission.
Is the Snapper lawn tractors HYT18 4WD?
The Snapper lawn tractors HYT18 is available in 2WD.