Introduction
Production Information of Snapper lawn tractors, GT1848H
The production information of the tractor (GT1848H) includes details about its manufacturing.
| The Snapper GT1848H is the same as the Power King 1218HV. |
| Built in Beaver Dam, Wisconsin, USA |
| Garden tractor |
| Distributor | Snapper |
|---|---|
| Manufacturer | Power King |
Dimension and Tires Information of Snapper lawn tractors, GT1848H
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 48 inches [121 cm] |
|---|---|
| Weight | 704 lbs [319 kg] |
| Height (steering wheel) | 42.5 inches [107 cm] |
| Length | 68 inches [172 cm] |
| Ground clearance | 8.5 inches [21 cm] |
| Width | 41 inches [104 cm] |
| Lawn/turf front | 16x6.50-8 |
|---|---|
| Lawn/turf rear | 23x10.50-12 |
Engine Specifications of Snapper lawn tractors, GT1848H
Get the specifications for the engine and if different options are available.
| Kohler CH18 |
| Air-cooled horizontal-shaft V-Twin |
| Gasoline |
| 2-cylinder |
| Power (gross) | 18 hp [13.4 kW] |
|---|---|
| Displacement | 624 cc [38.1 ci] |
| Starter | Electric |
| Bore/Stroke | 3.03x2.64 inches [77 x 67 mm] |
| Oil capacity | 2 qts [1.9 L] |
| Starter volts | 12 |
Transmission Information of Snapper lawn tractors, GT1848HY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Eaton 11 hydrostatic transmission with a Peerless 2500 two-speed transaxle. |
| Transmission | Eaton 11 |
|---|---|
| Type | Shaft-driven hydrostatic |
| Gears | Infinite forward and reverse (2-range) |
Mechanical Specs of Snapper lawn tractors, GT1848HY
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Open operator station. |
| Manual steering |
| Disc brakes |
Power Information of Snapper lawn tractors, GT1848HY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO Type | 2000 OptOptional |
|---|---|
| Front PTO | Independent |
| Clutch | Electric |
Electrical System of Snapper lawn tractors, GT1848H
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Battery CCA | 300 |
| Charging system | Flywheel alternator |
| Charging amps | 15 |
Frequently asked questions
How much horsepower does the Snapper lawn tractors GT1848H have?
The Snapper lawn tractors GT1848H delivers 18 HP.
What years was the Snapper lawn tractors GT1848H produced?
The Snapper lawn tractors GT1848H was produced in 1995-1997.
What engine does the Snapper lawn tractors GT1848H have?
The Snapper lawn tractors GT1848H is powered by a Gasoline, 2-cylinder engine.
What transmission does the Snapper lawn tractors GT1848H use?
The Snapper lawn tractors GT1848H uses a Eaton 11 transmission.
How much does the Snapper lawn tractors GT1848H weigh?
The Snapper lawn tractors GT1848H weighs 704 lbs [319 kg].
Is the Snapper lawn tractors GT1848H 4WD?
The Snapper lawn tractors GT1848H is available in 2WD.