Snapper lawn tractors GT600
Power
27 hp
Production
2007-2010
Engine
3-cylinder
Transmission
Tuff Torq K-92
Weight
1131 lbs [513 kg]
Drive
4WD
Introduction
Production Information of Snapper lawn tractors, GT600
The production information of the tractor (GT600) includes details about its manufacturing.
| Garden tractor |
| Original price was $12,095 in 2009 |
| Manufacturer | Snapper (a part of Briggs & Stratton) |
|---|
Dimension and Tires Information of Snapper lawn tractors, GT600
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 58.5 inches [148 cm] |
|---|---|
| Weight | 1131 lbs [513 kg] |
| Height | 51 inches [129 cm] |
| Length | 81 inches [205 cm] |
| Width | 44.75 inches [113 cm] |
| Lawn/turf front | 18x8.50-8 |
|---|---|
| Lawn/turf rear | 26x12.00-12 |
Engine Specifications of Snapper lawn tractors, GT600
Get the specifications for the engine and if different options are available.
| Liquid-cooled horizontal-shaft inline |
| 3-cylinder |
| Torque RPM | 2400 |
|---|---|
| Displacement | 952 cc [58.1 ci] |
| Oil capacity | 3.2 qts [3.0 L] |
| Pre-heating | Glow plugs |
| Bore/Stroke | 2.83x3.07 inches [72 x 78 mm] |
| Starter volts | 12 |
| Starter | Electric |
| Torque | 44 lb-ft [59.7 Nm] |
| Compression | 24:1 |
| Power (gross) | 27 hp [20.1 kW] |
Transmission Information of Snapper lawn tractors, GT600Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Transmission | Tuff Torq K-92 |
|---|---|
| Type F ATF | |
| Oil type | Type F ATF |
| Type | Shaft-driven hydrostatic |
| Gears | Infinite forward and reverse |
Mechanical Specs of Snapper lawn tractors, GT600Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Open operator station with 18-inch high back seat. |
| Wet disc brakes |
| Power steering |
| Drive | 4x4 4WD |
|---|---|
| Differential lock | Mechanical rear |
Power Information of Snapper lawn tractors, GT600Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540 |
Hydraulics Specifications of Snapper lawn tractors, GT600
Hydraulic system type, pressure, pump flow and valves.
| Pressure | 300 psi [20.7 bar] |
|---|---|
| Pump flow | 5 gpm [18.9 lpm] |
Three-Point Hitch of Snapper lawn tractors, GT600
Hitch category and rear/front lift capacity.
| Rear Type | I (limited) |
|---|---|
| Rear lift (at 24"/610mm) | 300 lbs [136 kg] |
Electrical System of Snapper lawn tractors, GT600
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Battery CCA | 500 |
| Charging system | Alternator |
| Charging amps | 40 |
Frequently asked questions
How much horsepower does the Snapper lawn tractors GT600 have?
The Snapper lawn tractors GT600 delivers 27 HP.
What years was the Snapper lawn tractors GT600 produced?
The Snapper lawn tractors GT600 was produced in 2007-2010.
What engine does the Snapper lawn tractors GT600 have?
The Snapper lawn tractors GT600 is powered by a 3-cylinder engine.
What transmission does the Snapper lawn tractors GT600 use?
The Snapper lawn tractors GT600 uses a Tuff Torq K-92 transmission.
How much does the Snapper lawn tractors GT600 weigh?
The Snapper lawn tractors GT600 weighs 1131 lbs [513 kg].
Is the Snapper lawn tractors GT600 4WD?
The Snapper lawn tractors GT600 is available in 4WD.