Snapper lawn tractors SPX 2548
Power
25 hp
Production
2014-2024
Engine
Gasoline, 2-cylinder
Transmission
Hydro-Gear T2
Drive
2WD
Introduction
Snapper SPX 2548 Lawn Tractor
The Snapper SPX 2548 is a lawn tractor produced between 2014 and 2024, designed primarily for residential lawn maintenance. Manufactured by Snapper, a division of Briggs & Stratton, this model is engineered for mowing tasks requiring a balance of power and maneuverability.
Engine and Powertrain
The tractor is powered by a Briggs & Stratton Professional 2-cylinder, air-cooled V-Twin gasoline engine with a vertical shaft, delivering a gross power output of 25 hp (18.6 kW). It utilizes an electric starter powered by a 12-volt battery system with 230 CCA. Power is delivered to the ground via a belt-driven Hydro-Gear T2 hydrostatic transmission, which provides infinite speed control in both forward and reverse directions.
Chassis and Dimensions
The machine features a two-wheel drive configuration with manual steering. Durability is supported by a cast iron front axle. The tractor rides on lawn and turf tires, measuring 15x6 at the front and 20x10 at the rear. Its physical footprint consists of a length of 71 inches (180 cm), a width of 60 inches (152 cm), and a height of 45 inches (114 cm).
Mowing and Operational Equipment
The SPX 2548 is equipped with a 48-inch mower deck. It includes an independent front power take-off (PTO) system, which is engaged via an electric clutch for ease of operation.
Conclusion
The Snapper SPX 2548 is a robust lawn tractor suited for homeowners managing extensive grass areas. Its hydrostatic transmission and 48-inch cutting deck make it a practical tool for efficient lawn care, combining standard mechanical components with convenient electrical features.
Production Information of Snapper lawn tractors, SPX 2548
- Lawn tractor
- Original price was $2,799 in 2014
| Manufacturer | Snapper (a part of Briggs & Stratton) |
|---|
Dimension and Tires Information of Snapper lawn tractors, SPX 2548
| Length | 71 inches [180 cm] |
|---|---|
| Front axle | Cast iron |
| Width | 60 inches [152 cm] |
| Height | 45 inches [114 cm] |
| Lawn/turf front | 15x6 |
|---|---|
| Lawn/turf rear | 20x10 |
Engine Specifications of Snapper lawn tractors, SPX 2548
- Briggs & Stratton Professional
- Air-cooled vertical shaft V-Twin
- Gasoline
- 2-cylinder
| Starter volts | 12 |
|---|---|
| Power (gross) | 25 hp [18.6 kW] |
| Starter | Electric |
Transmission Information of Snapper lawn tractors, SPX 2548
Transmission variants 1
| Transmission | Hydro-Gear T2 |
|---|---|
| Type | Belt-driven hydrostatic |
| Gears | Infinite forward and reverse |
Mechanical Specs of Snapper lawn tractors, SPX 2548
- Two-wheel drive
| Steering | Manual |
|---|
Power Information of Snapper lawn tractors, SPX 2548
| Front PTO | Independent |
|---|---|
| Clutch | Electric |
Electrical System of Snapper lawn tractors, SPX 2548
| Ground | Negative |
|---|---|
| Battery CCA | 230 |
| Battery volts | 12 |
Where it sits
With 25 HP, the Snapper lawn tractors SPX 2548 sits between YT400 (24 HP) and NXT 2652 (26 HP) in Snapper lawn tractors's range. Its power puts it in the 79th percentile of 2010s models in our database (783 machines).
Frequently asked questions
How much horsepower does the Snapper lawn tractors SPX 2548 have?
The Snapper lawn tractors SPX 2548 delivers 25 HP.
What years was the Snapper lawn tractors SPX 2548 produced?
The Snapper lawn tractors SPX 2548 was produced in 2014-2024.
What engine does the Snapper lawn tractors SPX 2548 have?
The Snapper lawn tractors SPX 2548 is powered by a Gasoline, 2-cylinder engine.
What transmission does the Snapper lawn tractors SPX 2548 use?
The Snapper lawn tractors SPX 2548 uses a Hydro-Gear T2 transmission.
Is the Snapper lawn tractors SPX 2548 4WD?
The Snapper lawn tractors SPX 2548 is available in 2WD.