Wheel Horse 110-4
Power
10 hp
Production
1988-1993
Engine
Gasoline, 1-cylinder
Transmission
Peerless 900
Weight
344 lbs [156 kg]
Drive
2WD
From the same series:
Introduction
Wheel Horse 110-4 Riding Lawn Mower
The Wheel Horse 110-4 is a riding lawn mower produced between 1988 and 1993. Manufactured by Wheel Horse, which later became a part of Toro, this model is designed for residential groundskeeping and lawn maintenance applications.
Engine and Performance
The tractor is powered by a single-cylinder, air-cooled Briggs & Stratton 256707 engine. This 399 cc (24.36 ci) vertical-shaft gasoline engine delivers 10 horsepower (7.5 kW). It utilizes a 12-volt electric starting system and has an oil capacity of 1.5 quarts (1.4 liters).
Transmission and Drivetrain
The 110-4 features a Peerless 900 transmission. It is a belt-driven gear system providing 4 forward gears and 1 reverse gear. The machine operates with a two-wheel-drive configuration and utilizes manual steering for operator control.
PTO and Mowing Equipment
Equipped with an independent mid-mounted Power Take-Off (PTO), the tractor utilizes a manual idler pulley clutch system to engage attachments. It is configured to operate with a 30-inch mower deck.
Dimensions and Chassis
The tractor weighs 344 lbs (156 kg) and has a wheelbase of 46.5 inches (118 cm). It sits on turf-oriented tires, with 4.10x3.50-4 tires on the front and 16x6.50-8 tires on the rear, suitable for lawn operation. The operator station is of an open-platform design.
Conclusion
The Wheel Horse 110-4 is a compact, gear-driven riding mower suited for standard lawn maintenance tasks. Its mechanical simplicity and established engine platform make it a representative model of late 1980s and early 1990s residential mowing equipment.
Production Information of Wheel Horse, 110-4
- Riding lawn mower
| Manufacturer | Wheel Horse (a part of Toro) |
|---|
Dimension and Tires Information of Wheel Horse, 110-4
| Wheelbase | 46.5 inches [118 cm] |
|---|---|
| Weight | 344 lbs [156 kg] |
| Length | 64.7 inches [164 cm] |
| Height | 41 inches [104 cm] |
| Lawn/turf front | 4.10x3.50-4 |
|---|---|
| Lawn/turf rear | 16x6.50-8 |
Engine Specifications of Wheel Horse, 110-4
- Briggs & Stratton 256707
- The Briggs engine was used on the 110-4 beginning with the 1989 model year.
- Air-cooled vertical-shaft
- Gasoline
- 1-cylinder
| Oil capacity | 1.5 qts [1.4 L] |
|---|---|
| Power | 10 hp [7.5 kW] |
| Displacement | 399 cc [24.36 ci] |
| Starter volts | 12 |
| Starter | Electric |
| Bore/Stroke | 3.44x2.62 inches [87 x 67 mm] |
Transmission Information of Wheel Horse, 110-4
Transmission variants 1
| Transmission | Peerless 900 |
|---|---|
| Type | Belt-driven gear |
| Gears | 4 forward and 1 reverse |
Mechanical Specs of Wheel Horse, 110-4
- Two-wheel drive
- Manual steering
- Open operator station.
Power Information of Wheel Horse, 110-4
| Mid PTO | Independent |
|---|---|
| Clutch | Manual idler pulley |
Electrical System of Wheel Horse, 110-4
| Ground | Negative |
|---|---|
| Battery AH | 14 |
| Battery volts | 12 |
| Charging amps | 3 |
| Battery CCA | 120 |
Where it sits
With 10 HP, the Wheel Horse 110-4 sits just below 112-6 (12 HP) in Wheel Horse's range. Its power puts it in the 25th percentile of 1980s models in our database (977 machines).
Frequently asked questions
How much horsepower does the Wheel Horse 110-4 have?
The Wheel Horse 110-4 delivers 10 HP.
What years was the Wheel Horse 110-4 produced?
The Wheel Horse 110-4 was produced in 1988-1993.
What engine does the Wheel Horse 110-4 have?
The Wheel Horse 110-4 is powered by a Gasoline, 1-cylinder engine.
What transmission does the Wheel Horse 110-4 use?
The Wheel Horse 110-4 uses a Peerless 900 transmission.
How much does the Wheel Horse 110-4 weigh?
The Wheel Horse 110-4 weighs 344 lbs [156 kg].
Is the Wheel Horse 110-4 4WD?
The Wheel Horse 110-4 is available in 2WD.