Wheel Horse 112-6
Power
12 hp
Production
1988-1993
Engine
1-cylinder
Transmission
Peerless 920
Weight
364 lbs [165 kg]
Drive
2WD
From the same series:
Introduction
Wheel Horse 112-6 Lawn Tractor
The Wheel Horse 112-6 is a riding lawn mower produced between 1988 and 1993, representing a part of the 110-4 series. Designed by Wheel Horse, a division of Toro, this machine serves primarily as a dedicated residential lawn maintenance vehicle.
Engine and Performance
The tractor is powered by a vertical-shaft, air-cooled, single-cylinder Briggs & Stratton engine. It provides 12.5 hp (9.3 kW) from a 465 cc (28.4 ci) displacement. The engine utilizes an electric starter and operates on a 12-volt system. Maintenance specifications include an oil capacity of 1.5 quarts (1.4 liters).
Transmission and Drivetrain
The machine features a Peerless 920 belt-driven gear transmission, offering a configuration of six forward gears and one reverse gear. Power is delivered to the rear wheels via a two-wheel drive system, and the cutting deck engagement is managed by a manual idler pulley clutch.
Dimensions and Chassis
Built on a 46.5-inch wheelbase, the tractor has a total length of 64.7 inches and a height of 41 inches, with a curb weight of 364 lbs (165 kg). It is equipped with turf-specific tires, sized 4.10x3.50-4 at the front and 16x6.50-8 at the rear, designed to minimize soil compaction and turf damage.
Conclusion
The Wheel Horse 112-6 is a compact, mechanical-steering riding mower suited for standard lawn care tasks. Its simple belt-driven transmission and straightforward operator interface make it a functional choice for residential property maintenance.
Production Information of Wheel Horse, 112-6
- Riding lawn mower
| Manufacturer | Wheel Horse (a part of Toro) |
|---|
Dimension and Tires Information of Wheel Horse, 112-6
| Wheelbase | 46.5 inches [118 cm] |
|---|---|
| Weight | 364 lbs [165 kg] |
| Length | 64.7 inches [164 cm] |
| Height | 41 inches [104 cm] |
| Lawn/turf front | 4.10x3.50-4 |
|---|---|
| Lawn/turf rear | 16x6.50-8 |
Engine Specifications of Wheel Horse, 112-6
- The Briggs engine was used on the 112-6 beginning with the 1990 model year. The 281707 in 1990, and a 286707 in 1991-1992.
- Air-cooled vertical-shaft
- Image courtesy of Sorin Lungoci
- 1-cylinder
| Oil capacity | 1.5 qts [1.4 L] |
|---|---|
| Power | 12.5 hp [9.3 kW] |
| Displacement | 465 cc [28.4 ci] |
| Starter volts | 12 |
| Starter | Electric |
| Bore/Stroke | 3.44x3.06 inches [87 x 78 mm] |
Transmission Information of Wheel Horse, 112-6
Transmission variants 1
| Transmission | Peerless 920 |
|---|---|
| Type | Belt-driven gear |
| Gears | 6 forward and 1 reverse |
Mechanical Specs of Wheel Horse, 112-6
- Two-wheel drive
- Manual steering
- Open operator station.
Power Information of Wheel Horse, 112-6
| Mid PTO | Independent |
|---|---|
| Clutch | Manual idler pulley |
Electrical System of Wheel Horse, 112-6
| Ground | Negative |
|---|---|
| Battery AH | 14 |
| Battery volts | 12 |
| Charging amps | 3 |
| Battery CCA | 120 |
Where it sits
With 12 HP, the Wheel Horse 112-6 sits just above 110-4 (10 HP) in Wheel Horse's range. Its power puts it in the 56th percentile of 1980s models in our database (977 machines).
Frequently asked questions
How much horsepower does the Wheel Horse 112-6 have?
The Wheel Horse 112-6 delivers 12 HP.
What years was the Wheel Horse 112-6 produced?
The Wheel Horse 112-6 was produced in 1988-1993.
What engine does the Wheel Horse 112-6 have?
The Wheel Horse 112-6 is powered by a 1-cylinder engine.
What transmission does the Wheel Horse 112-6 use?
The Wheel Horse 112-6 uses a Peerless 920 transmission.
How much does the Wheel Horse 112-6 weigh?
The Wheel Horse 112-6 weighs 364 lbs [165 kg].
Is the Wheel Horse 112-6 4WD?
The Wheel Horse 112-6 is available in 2WD.