Introduction
Wheel Horse 516-H Garden Tractor
The Wheel Horse 516-H is a garden tractor produced in 1988 in South Bend, Indiana, USA. Designed by Wheel Horse, then a division of Toro, this model is engineered for residential lawn maintenance and versatile garden tasks.
Engine and Performance
The tractor is powered by an Onan P216G engine, an air-cooled, horizontal-shaft, two-cylinder opposed twin gasoline engine. It features a displacement of 709 cc (43.3 ci) and a bore-to-stroke ratio of 3.25 by 2.62 inches. This power unit delivers 16 hp (11.9 kW), providing the necessary output for standard landscaping implements.
Transmission and Drivetrain
The 516-H utilizes an Eaton 700 belt-driven hydrostatic transmission. This system provides infinite forward and reverse gear ratios, allowing for smooth speed control without manual shifting. The machine operates on a two-wheel drive configuration.
Operational Controls and PTO
Steering is managed through a manual system, while stopping power is provided by mechanical band brakes. An independent mid-PTO, engaged via a mechanical clutch, allows for the attachment and operation of various mower decks, specifically supporting 36-inch, 42-inch, and 48-inch configurations.
Dimensions and Chassis
The tractor is built on a 45.5-inch (115 cm) wheelbase with an overall length of 65 inches (165 cm) and a width of 36.4 inches (92 cm). It weighs approximately 601 lbs (272 kg). It is equipped with 16x6.50-8 front tires and 23x8.50-12 rear tires, both optimized for turf applications.
Conclusion
The Wheel Horse 516-H is a compact and durable garden tractor suited for landowners requiring a maneuverable machine for mowing and light utility work. Its combination of a reliable Onan twin-cylinder engine and a hydrostatic transmission makes it a practical choice for consistent lawn care.
Production Information of Wheel Horse, 516-H
- Garden tractor
- Built in South Bend, Indiana, USA
| Manufacturer | Wheel Horse (a part of Toro) |
|---|
Dimension and Tires Information of Wheel Horse, 516-H
| Wheelbase | 45.5 inches [115 cm] |
|---|---|
| Weight | 601 lbs [272 kg] |
| Height | 40.5 inches [102 cm] |
| Length | 65 inches [165 cm] |
| Width | 36.4 inches [92 cm] |
| Lawn/turf front | 16x6.50-8 |
|---|---|
| Lawn/turf rear | 23x8.50-12 |
Engine Specifications of Wheel Horse, 516-H
- Onan P216G
- Air-cooled horizontal-shaft opposed twin
- Gasoline
- 2-cylinder
| Power | 16 hp [11.9 kW] |
|---|---|
| Displacement | 709 cc [43.3 ci] |
| Starter volts | 12 |
| Bore/Stroke | 3.25x2.62 inches [83 x 67 mm] |
Transmission Information of Wheel Horse, 516-H
Transmission variants 1
| Transmission | Eaton 700 |
|---|---|
| Type | Belt-driven hydrostatic |
| Gears | Infinite forward and reverse |
Mechanical Specs of Wheel Horse, 516-H
- Two-wheel drive
- Open operator station.
- Manual steering
- Mechanical band brakes
Power Information of Wheel Horse, 516-H
| Mid PTO | Independent |
|---|---|
| Clutch | Mechanical |
Electrical System of Wheel Horse, 516-H
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Charging amps | 20 |
| Battery CCA | 200 |
Where it sits
With 16 HP, the Wheel Horse 516-H sits just below 518-H (18 HP) in Wheel Horse's range. Its power puts it in the 78th percentile of 1980s models in our database (977 machines).
Frequently asked questions
How much horsepower does the Wheel Horse 516-H have?
The Wheel Horse 516-H delivers 16 HP.
What years was the Wheel Horse 516-H produced?
The Wheel Horse 516-H was produced in 1988.
What engine does the Wheel Horse 516-H have?
The Wheel Horse 516-H is powered by a Gasoline, 2-cylinder engine.
What transmission does the Wheel Horse 516-H use?
The Wheel Horse 516-H uses a Eaton 700 transmission.
How much does the Wheel Horse 516-H weigh?
The Wheel Horse 516-H weighs 601 lbs [272 kg].
Is the Wheel Horse 516-H 4WD?
The Wheel Horse 516-H is available in 2WD.