Wheel Horse 857
Power
8 hp
Production
1967
Engine
Gasoline, 1-cylinder
Transmission
Uni-Drive
Weight
430 lbs [195 kg]
Drive
2WD
From the same series:
Introduction
Wheel Horse 857 Garden Tractor
The Wheel Horse 857 is a garden tractor produced in 1967 in South Bend, Indiana, USA. Part of the 657 and 867 series, this machine was designed for residential lawn maintenance and light groundskeeping duties.
Engine and Performance
The tractor is powered by a Kohler K181S, a 1-cylinder, air-cooled gasoline engine. It produces 8 horsepower (6.0 kW) at a rated speed of 3600 RPM. The engine features a displacement of 305 cc (18.64 ci) with a bore and stroke of 75 x 70 mm. It requires a 12-volt starter and has an oil capacity of 1.2 liters.
Transmission and Drive System
The 857 utilizes a Uni-Drive transmission system. It provides three forward gears and one reverse gear. Power is delivered through a two-wheel drive configuration, allowing for standard operation in garden environments.
Dimensions and Handling
The tractor features manual steering and an open operator station. It has a wheelbase of 104 cm (41.25 inches) and an overall length of 154 cm (61 inches). With a width of 86 cm (34 inches) and a ground clearance of 18 cm (7.25 inches), the unit is designed for maneuverability. The shipping weight is approximately 195 kg (430 lbs). It is equipped with 16x5.50-8 front lawn/turf tires and 23x8.50-12 rear lawn/turf tires.
Mowing Capability
The machine is configured to support a 36-inch mower deck, which serves as its primary implement for lawn care applications.
Conclusion
The Wheel Horse 857 is a compact, manually-operated garden tractor suited for residential lawn maintenance. Its simple mechanical design and specific tire setup make it a representative example of mid-1960s American garden equipment.
Production Information of Wheel Horse, 857
- Garden tractor
- Built in South Bend, Indiana, USA
| Manufacturer | Wheel Horse |
|---|
Dimension and Tires Information of Wheel Horse, 857
| Ground clearance | 7.25 inches [18 cm] |
|---|---|
| Wheelbase | 41.25 inches [104 cm] |
| Height (hood) | 33.5 inches [85 cm] |
| Height (steering wheel) | 37 inches [93 cm] |
| Length | 61 inches [154 cm] |
| Shipping weight | 430 lbs [195 kg] |
| Width | 34 inches [86 cm] |
| Lawn/turf front | 16x5.50-8 |
|---|---|
| Lawn/turf rear | 23x8.50-12 |
Engine Specifications of Wheel Horse, 857
- Kohler K181S
- Air-cooled
- Gasoline
- 1-cylinder
| Power | 8 hp [6.0 kW] |
|---|---|
| Displacement | 305 cc [18.64 ci] |
| Rated RPM | 3600 |
| Bore/Stroke | 2.938x2.75 inches [75 x 70 mm] |
| Oil capacity | 1.25 qts [1.2 L] |
| Starter volts | 12 |
Transmission Information of Wheel Horse, 857
Transmission variants 1
| Transmission | Uni-Drive |
|---|---|
| Type | Gear |
| Gears | 3 forward and 1 reverse |
Mechanical Specs of Wheel Horse, 857
- Two-wheel drive
- Manual steering
- Open operator station
Electrical System of Wheel Horse, 857
| Ground | Negative |
|---|---|
| Battery volts | 12 |
Where it sits
With 8 HP, the Wheel Horse 857 sits just above 657 (6 HP) in Wheel Horse's range. Its power puts it in the 72th percentile of 1960s models in our database (550 machines).
Frequently asked questions
How much horsepower does the Wheel Horse 857 have?
The Wheel Horse 857 delivers 8 HP.
What years was the Wheel Horse 857 produced?
The Wheel Horse 857 was produced in 1967.
What engine does the Wheel Horse 857 have?
The Wheel Horse 857 is powered by a Gasoline, 1-cylinder engine.
What transmission does the Wheel Horse 857 use?
The Wheel Horse 857 uses a Uni-Drive transmission.
How much does the Wheel Horse 857 weigh?
The Wheel Horse 857 weighs 430 lbs [195 kg].
Is the Wheel Horse 857 4WD?
The Wheel Horse 857 is available in 2WD.