Introduction
Production Information of AGCO, ST47A
The production information of the tractor (ST47A) includes details about its manufacturing.
| Built in Matsuyama, Japan |
| Compact Utility tractor |
| Distributor | AGCO |
|---|---|
| Manufacturer | Iseki |
Dimension and Tires Information of AGCO, ST47A
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 75 inches [190 cm] |
|---|---|
| Shipping weight | 3494 lbs [1584 kg] |
| Height (ROPS) | 90 inches [228 cm] |
| Length | 130 inches [330 cm] |
| Ground clearance | 16 inches [40 cm] |
| Width | 65 inches [165 cm] |
No data available
Engine Specifications of AGCO, ST47A
Get the specifications for the engine and if different options are available.
| Iseki |
| Liquid-cooled |
| Diesel |
| 4-cylinder |
| Power (gross) | 47.5 hp [35.4 kW] |
|---|---|
| Displacement | 134 ci [2.2 L] |
| Rated RPM | 2600 |
| Bore/Stroke | 3.43x3.62 inches [87 x 92 mm] |
| Starter volts | 12 |
| Starter | Electric |
Transmission Information of AGCO, ST47AY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Synchro shuttle |
|---|---|
| Gears | 8 forward and reverse |
Transmission variants 2
| Type | Power shuttle |
|---|---|
| Gears | 12 forward and reverse |
Transmission variants 3
| Type | Hydrostatic |
|---|---|
| Gears | Infinite forward and reverse |
Transmission variants 4
| Four-speed push button power shift in three ranges, with power shuttle. |
| Transmission | QuadraShift |
|---|---|
| Type | Four-speed power shift |
| Gears | 12 forward and reverse |
| 8-speed synchro shuttle |
| 12-speed four-speed power shift |
| 12-speed power shuttle |
| Hydrostatic |
Mechanical Specs of AGCO, ST47AY
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Wet disc brakes |
| Power steering |
| ROPS. Cab optional with air-conditioning. |
| Final drives | Spur gear |
|---|---|
| Differential lock | Mechanical rear |
Power Information of AGCO, ST47AY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540 (1.375) |
Hydraulics Specifications of AGCO, ST47A
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Pump flow | 11.6 gpm [43.9 lpm] |
Three-Point Hitch of AGCO, ST47A
Hitch category and rear/front lift capacity.
| Rear Type | I |
|---|---|
| Rear lift (at 24"/610mm) | 3086 lbs [1399 kg] |
| Control | Position control with optional draft control |
| Rear lift (at ends) | 3483 lbs [1579 kg] |
Electrical System of AGCO, ST47A
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the AGCO ST47A have?
The AGCO ST47A delivers 47 HP.
What years was the AGCO ST47A produced?
The AGCO ST47A was produced in 2005-2008.
What engine does the AGCO ST47A have?
The AGCO ST47A is powered by a Diesel, 4-cylinder engine.
What transmission does the AGCO ST47A use?
The AGCO ST47A uses a Synchro shuttle transmission.
How much does the AGCO ST47A weigh?
The AGCO ST47A weighs 3494 lbs [1584 kg].
Is the AGCO ST47A 4WD?
The AGCO ST47A is available in 4WD.