Introduction
Production Information of AGCO, ST45
The production information of the tractor (ST45) includes details about its manufacturing.
| Built in Matsuyama, Japan |
| Compact Utility tractor |
| Distributor | AGCO |
|---|---|
| Manufacturer | Iseki |
Dimension and Tires Information of AGCO, ST45
This section sums up the dimension and tires information of the tractor.
| Front tread | 52.5 inches [133 cm] |
|---|---|
| Wheelbase | 78.9 inches [200 cm] |
| Shipping weight | 4448 lbs [2017 kg] |
| Height (ROPS) | 89 inches [226 cm] |
| Length | 137 inches [347 cm] |
| Rear tread | 52 to 60 inches [132 to 152 cm] |
| Max weight | 6000 lbs [2721 kg] |
| Width | 69.1 inches [175 cm] |
| Standard tires (ag) | Front: 9.5-16. Rear: 13.6-28 |
|---|---|
| Lawn/turf front | 212/80D-15 |
| Lawn/turf rear | 475/65D-20 |
Engine Specifications of AGCO, ST45
Get the specifications for the engine and if different options are available.
| Iseki E4CG |
| Liquid-cooled inline |
| Diesel |
| 4-cylinder |
| Torque RPM | 1500 |
|---|---|
| Torque | 139 lb-ft [188.5 Nm] |
| Coolant capacity | 10 qts [9.5 L] |
| Power (gross) | 44.2 hp [33.0 kW] |
| Starter | Electric |
| Air cleaner | Dry |
| Pre-heating | Glow plugs |
| Fuel system | Indirect injection |
| Displacement | 134.1 ci [2.2 L] |
| Power (net) | 42.4 hp [31.6 kW] |
| Bore/Stroke | 3.43x3.64 inches [87 x 92 mm] |
| Idle RPM | 975-2700 |
| Starter volts | 12 |
| Oil capacity | 8.4 qts [7.9 L] |
| Rated RPM | 2600 |
| Compression | 21.8:1 |
Transmission Information of AGCO, ST45Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Mechanical shuttle |
|---|---|
| Gears | 16 forward and reverse |
| Clutch | 260mm dry disc |
Transmission variants 2
| Type | Power shuttle |
|---|---|
| Gears | 16 forward and reverse |
| Clutch | Wet disc |
Transmission variants 3
| Type | Hydrostatic |
|---|---|
| Gears | Infinite forward and reverse (four-range) |
| 16-speed mechanical shuttle |
| 16-speed power shuttle |
| Hydrostatic |
Mechanical Specs of AGCO, ST45Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Wet disc brakes |
| Power steering |
| Two-post fixed ROPS. |
| Final drives | Spur gear |
|---|---|
| Differential lock | Mechanical rear |
Power Information of AGCO, ST45Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Mid PTO | Optional *Mid PTO only available with hydrostatic transmission. |
| Engine RPM | 540@2391 |
| Clutch | Electro-hydraulic wet disc |
| Mid PTO Type | 2000 |
| Rear PTO Type | 540 (1.375) |
Hydraulics Specifications of AGCO, ST45
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Steering flow | 5.2 gpm [19.7 lpm] |
| Total flow | 12.6 gpm [47.7 lpm] |
| Pressure | 2275 psi [156.9 bar] |
| Steering press. | 2485 psi [171.3 bar] |
| Pump flow | 7.4 gpm [28.0 lpm] |
Three-Point Hitch of AGCO, ST45
Hitch category and rear/front lift capacity.
| Rear Type | I |
|---|---|
| Rear Arms | Telescopic link ends |
| Rear lift (at 24"/610mm) | 2600 lbs [1179 kg] |
| Control | Position and draft control |
| Rear lift (at ends) | 3086 lbs [1399 kg] |
Electrical System of AGCO, ST45
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Battery CCA | 622 |
| Charging system | Alternator |
| Charging amps | 40 |
Frequently asked questions
How much horsepower does the AGCO ST45 have?
The AGCO ST45 delivers 44 HP.
What years was the AGCO ST45 produced?
The AGCO ST45 was produced in 2001-2004.
What engine does the AGCO ST45 have?
The AGCO ST45 is powered by a Diesel, 4-cylinder engine.
What transmission does the AGCO ST45 use?
The AGCO ST45 uses a Mechanical shuttle transmission.
How much does the AGCO ST45 weigh?
The AGCO ST45 weighs 4448 lbs [2017 kg].
Is the AGCO ST45 4WD?
The AGCO ST45 is available in 4WD.