Introduction
Production Information of AGCO, ST32
The production information of the tractor (ST32) includes details about its manufacturing.
| Compact Utility tractor |
| Distributor | AGCO |
|---|---|
| Manufacturer | Iseki |
Dimension and Tires Information of AGCO, ST32
This section sums up the dimension and tires information of the tractor.
| Front tread | 42.5 inches [107 cm] |
|---|---|
| Wheelbase | 65.6 inches [166 cm] |
| Height (Folded ROPS) | 68.3 inches [173 cm] |
| Height (ROPS) | 79.3 inches [201 cm] |
| Length | 116.5 inches [295 cm] |
| Rear tread | 37.8 inches [96 cm] |
| Shipping weight | 2642 lbs [1198 kg] |
| Width | 51 inches [129 cm] |
| Industrial rear | 12.5/80-18 |
|---|
Engine Specifications of AGCO, ST32
Get the specifications for the engine and if different options are available.
| Iseki E3CD |
| Liquid-cooled |
| Diesel |
| 3-cylinder |
| Starter | Electric |
|---|---|
| Displacement | 91.4 ci [1.5 L] |
| Fuel system | Indirect injection |
| Bore/Stroke | 3.43x3.31 inches [87 x 84 mm] |
| Starter volts | 12 |
| Rated RPM | 2600 |
| Air cleaner | Dry |
| Power (gross) | 33 hp [24.6 kW] |
Transmission Information of AGCO, ST32Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Hydrostatic |
|---|---|
| Gears | Infinite forward and reverse (3-range) |
Mechanical Specs of AGCO, ST32Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Wet disc brakes |
| Power steering |
| Two-post folding ROPS. |
| Final drives | Spur gear |
|---|---|
| Differential lock | Mechanical rear |
Power Information of AGCO, ST32Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Mid PTO Type | SAE 15 1.0 |
| Mid PTO | Independent |
| Clutch | Electro-hydraulic |
| Engine RPM | 2000@2600 |
| Rear PTO Type | 540 (1.375) |
Hydraulics Specifications of AGCO, ST32
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Steering flow | 2.7 gpm [10.2 lpm] |
| Total flow | 10.4 gpm [39.4 lpm] |
| Pressure | 2134 psi [147.1 bar] |
| Pump flow | 7.7 gpm [29.1 lpm] |
Three-Point Hitch of AGCO, ST32
Hitch category and rear/front lift capacity.
| Rear Type | I |
|---|---|
| Rear Arms | Fixed link ends with telescopic stabilizer |
| Rear lift (at ends) | 2425 lbs [1099 kg] |
| Control | Position control |
| Draft control OptOptional |
Electrical System of AGCO, ST32
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the AGCO ST32 have?
The AGCO ST32 delivers 33 HP.
What years was the AGCO ST32 produced?
The AGCO ST32 was produced in 2001-2004.
What engine does the AGCO ST32 have?
The AGCO ST32 is powered by a Diesel, 3-cylinder engine.
What transmission does the AGCO ST32 use?
The AGCO ST32 uses a Hydrostatic transmission.
How much does the AGCO ST32 weigh?
The AGCO ST32 weighs 2642 lbs [1198 kg].
Is the AGCO ST32 4WD?
The AGCO ST32 is available in 4WD.