Introduction
AGCO ST30x Compact Utility Tractor
The AGCO ST30x is a compact utility tractor produced as part of the ST series. Designed for versatility in agricultural and landscaping applications, this model provides a balance of power and maneuverability for varied field and maintenance tasks.
Engine and Performance
The tractor is powered by an Iseki E3CF 3-cylinder liquid-cooled diesel engine. It features a displacement of 89.3 cubic inches (1.5 liters) and utilizes indirect injection. The power output is rated at 28.4 gross horsepower (21.2 kW), with a net power of 27.6 horsepower (20.6 kW) at 2500 rated RPM. The engine produces a maximum torque of 70.4 lb-ft (95.5 Nm) at 1500 RPM.
Transmission and Drivetrain
The ST30x is equipped with a gear-type transmission providing 9 forward and 3 reverse speeds. It uses a 225mm dry disc clutch. The drivetrain supports either two-wheel or four-wheel drive configurations, featuring spur gear final drives, a mechanical rear differential lock, and wet disc brakes for reliable stopping power.
Hydraulics and PTO
The hydraulic system is an open-center design with a total flow capacity of 8.5 gpm (32.2 lpm). The rear PTO operates at 540 RPM at an engine speed of 2327 RPM. An optional mid-PTO is available, utilizing an SAE 15 1.0 shaft, which operates at 2000 RPM at an engine speed of 2381 RPM.
Dimensions and Hitch
With a wheelbase of 64.6 inches (164 cm) and a total length of 116.5 inches (295 cm), the tractor offers a compact footprint. The shipping weight is 1,984 lbs (899 kg). The rear hitch is a Category I three-point hitch, capable of lifting 1,323 lbs (600 kg) at 24 inches behind the lift points, with position control as standard equipment.
Conclusion
The AGCO ST30x is a robust compact utility tractor suited for operators requiring a reliable machine for light-to-medium agricultural duties, landscaping, and property maintenance where maneuverability and consistent performance are required.
Production Information of AGCO, ST30x
- Compact Utility tractor
| Manufacturer | AGCO |
|---|
Dimension and Tires Information of AGCO, ST30x
- Flange rear axle
| Ground clearance | 12 inches [30 cm] |
|---|---|
| Wheelbase | 64.6 inches [164 cm] |
| Shipping weight | 1984 lbs [899 kg] |
| Height (ROPS) | 79.3 inches [201 cm] |
| Length | 116.5 inches [295 cm] |
| Max weight | 4136 lbs [1876 kg] |
| Width | 55.6 inches [141 cm] |
| Rear tread | 43.1 inches [109 cm] |
| Front tread | 37.8 inches [96 cm] |
| 2WD Standard tires (ag) | Front: 5.00-15. Rear: 9.5-16 |
|---|---|
| 2WD Lawn/turf rear | 315/75D-15 |
| 4WD Lawn/turf front | 27x8.50-15 |
| 4WD Standard tires (ag) | Front: 6.00-14. Rear: 12.4-16 |
| 4WD Lawn/turf rear | 315/80D-16 |
| 2WD Lawn/turf front | 24x8.50-12 |
Engine Specifications of AGCO, ST30x
- Iseki E3CF
- Liquid-cooled inline
- Diesel
- 3-cylinder
| Torque RPM | 1500 |
|---|---|
| Torque | 70.4 lb-ft [95.5 Nm] |
| Coolant capacity | 7.5 qts [7.1 L] |
| Power (gross) | 28.4 hp [21.2 kW] |
| Starter | Electric |
| Air cleaner | Dry |
| Pre-heating | Glow plugs |
| Fuel system | Indirect injection |
| Displacement | 89.3 ci [1.5 L] |
| Power (net) | 27.6 hp [20.6 kW] |
| Bore/Stroke | 3.39x3.30 inches [86 x 84 mm] |
| Idle RPM | 930-2750 |
| Starter volts | 12 |
| Oil capacity | 3.8 qts [3.6 L] |
| Rated RPM | 2500 |
| Compression | 21.7:1 |
Transmission Information of AGCO, ST30x
Transmission variants 1
- Three gears (1-3), plus reverse, in three ranges. Tractor must be stopped, and clutch used, to shift gears or range.
| Type | Gear |
|---|---|
| Gears | 9 forward and 3 reverse |
| Clutch | 225mm dry disc |
Mechanical Specs of AGCO, ST30x
- Two- or four-wheel drive
- Wet disc brakes
- Power steering
- Two-post fixed ROPS.
| Final drives | Spur gear |
|---|---|
| Differential lock | Mechanical rear |
Power Information of AGCO, ST30x
| Rear PTO | Transmission |
|---|---|
| Mid PTO Type | SAE 15 1.0 |
| Mid PTO(optional) | Transmission |
| Rear PTO Type | 540 (1.375) |
| Engine RPM | 2000@2381 |
| Engine RPM | 540@2327 |
Hydraulics Specifications of AGCO, ST30x
| Type | Open center |
|---|---|
| Steering flow | 2.5 gpm [9.5 lpm] |
| Total flow | 8.5 gpm [32.2 lpm] |
| Pressure | 2130 psi [146.9 bar] |
| Steering press. | 1707 psi [117.7 bar] |
| Pump flow | 6.0 gpm [22.7 lpm] |
Three-Point Hitch of AGCO, ST30x
| Rear Type | I |
|---|---|
| Rear lift (at 24"/610mm) | 1323 lbs [600 kg] |
| Rear lift (at ends) | 1984 lbs [899 kg] |
| Control | Position control |
| Control(optional) | Draft control |
Electrical System of AGCO, ST30x
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Battery CCA | 582 |
| Charging system | Alternator |
| Charging amps | 40 |
Where it sits
With 28 HP, the AGCO ST30x sits between ST25 (24 HP) and ST30 (30 HP) in AGCO's range. Its power puts it in the 14th percentile of 2000s models in our database (2822 machines).
Frequently asked questions
How much horsepower does the AGCO ST30x have?
The AGCO ST30x delivers 28 HP.
What years was the AGCO ST30x produced?
The AGCO ST30x was produced in 2001.
What engine does the AGCO ST30x have?
The AGCO ST30x is powered by a Diesel, 3-cylinder engine.
What transmission does the AGCO ST30x use?
The AGCO ST30x uses a Gear transmission.
How much does the AGCO ST30x weigh?
The AGCO ST30x weighs 1984 lbs [899 kg].
Is the AGCO ST30x 4WD?
The AGCO ST30x is available in 2WD/4WD.