Introduction
Production Information of AGCO, ST28A
The production information of the tractor (ST28A) includes details about its manufacturing.
| Built in Matsuyama, Japan |
| Compact Utility tractor |
| Distributor | AGCO |
|---|---|
| Manufacturer | Iseki |
Dimension and Tires Information of AGCO, ST28A
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 65.5 inches [166 cm] |
|---|---|
| Shipping weight | 2205 lbs [1000 kg] |
| Height | 79 inches [200 cm] |
| Length | 114.6 inches [291 cm] |
| Width | 49.6 inches [125 cm] |
No data available
Engine Specifications of AGCO, ST28A
Get the specifications for the engine and if different options are available.
| Iseki |
| Liquid-cooled |
| Diesel |
| 3-cylinder |
| Power (gross) | 28.4 hp [21.2 kW] |
|---|---|
| Displacement | 89.3 ci [1.5 L] |
| Rated RPM | 2500 |
| Bore/Stroke | 3.39x3.30 inches [86 x 84 mm] |
| Starter volts | 12 |
| Starter | Electric |
Transmission Information of AGCO, ST28AY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Hydrostatic |
|---|---|
| Gears | Infinite forward and reverse |
Transmission variants 2
| Transmission | Gear |
|---|---|
| Gears | 9 forward and 3 reverse |
| Hydrostatic |
| 9-speed |
Mechanical Specs of AGCO, ST28AY
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Two-post folding ROPS. |
| Wet disc brakes |
| Power steering |
| Differential lock | Mechanical rear |
|---|
Power Information of AGCO, ST28AY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Transmission (gear) |
|---|---|
| Mid PTO Type | 2000 |
| Mid PTO | Independent OptOptional |
| Independent (hydrostatic) | |
| Rear PTO Type | 540 (1.375) |
Hydraulics Specifications of AGCO, ST28A
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Pump flow | 7.4 gpm [28.0 lpm] |
Three-Point Hitch of AGCO, ST28A
Hitch category and rear/front lift capacity.
| Rear Type | I |
|---|---|
| Rear lift (at ends) | 2425 lbs [1099 kg] |
| Rear lift (at 24"/610mm) | 1610 lbs [730 kg] |
Electrical System of AGCO, ST28A
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the AGCO ST28A have?
The AGCO ST28A delivers 28 HP.
What years was the AGCO ST28A produced?
The AGCO ST28A was produced in 2005-2008.
What engine does the AGCO ST28A have?
The AGCO ST28A is powered by a Diesel, 3-cylinder engine.
What transmission does the AGCO ST28A use?
The AGCO ST28A uses a Hydrostatic transmission.
How much does the AGCO ST28A weigh?
The AGCO ST28A weighs 2205 lbs [1000 kg].
Is the AGCO ST28A 4WD?
The AGCO ST28A is available in 4WD.