Introduction
Iseki ST34A Compact Utility Tractor
The Iseki ST34A is a compact utility tractor produced between 2005 and 2008 in Matsuyama, Japan. Distributed by AGCO, this machine is designed for versatile agricultural and maintenance tasks, offering a balance between compact dimensions and mechanical robustness.
Engine and Performance
The tractor is powered by an Iseki E3CD 3-cylinder diesel engine. With a displacement of 1.5 liters (91.4 ci), this liquid-cooled power unit delivers a gross output of 33 horsepower (24.6 kW) at a rated engine speed of 2600 RPM. The engine utilizes an electric starter system with 12-volt capacity.
Transmission and Drivetrain
The ST34A offers significant flexibility in operation through three transmission choices: an 8-speed synchro shuttle, a 12-speed power shuttle, or a hydrostatic transmission providing infinite forward and reverse speeds. All configurations are supported by a four-wheel-drive system, power steering, and wet disc brakes. A mechanical rear differential lock is included to improve traction in challenging soil conditions.
Hydraulics and PTO
The hydraulic system utilizes an open-center design with a pump flow rate of 9.1 gallons per minute (34.4 liters per minute). The rear hitch is a Category I type, capable of lifting up to 2535 lbs (1149 kg) at 24 inches behind the lift points. Power take-off options include an independent 540 RPM rear PTO (1.375 shaft) and an optional 2000 RPM mid-mount PTO.
Dimensions and Chassis
Built on a 70-inch (177 cm) wheelbase, the tractor features a total length of 121 inches (307 cm) and a width of 62 inches (157 cm). The ROPS-equipped unit stands 81 inches (205 cm) tall and provides 14 inches (35 cm) of ground clearance. The shipping weight of the machine is 2844 lbs (1290 kg).
Conclusion
The Iseki ST34A represents a reliable compact utility platform suitable for farm operations requiring maneuverability and moderate power. Its varied transmission options and standard 4WD configuration make it adaptable to both transport duties and implement-heavy field work.
Production Information of AGCO, ST34A
- Built in Matsuyama, Japan
- Compact Utility tractor
| Distributor | AGCO |
|---|---|
| Manufacturer | Iseki |
Dimension and Tires Information of AGCO, ST34A
| Wheelbase | 70 inches [177 cm] |
|---|---|
| Shipping weight | 2844 lbs [1290 kg] |
| Height (ROPS) | 81 inches [205 cm] |
| Length | 121 inches [307 cm] |
| Ground clearance | 14 inches [35 cm] |
| Width | 62 inches [157 cm] |
Engine Specifications of AGCO, ST34A
- Iseki E3CD
- Liquid-cooled
- Diesel
- 3-cylinder
| Power (gross) | 33 hp [24.6 kW] |
|---|---|
| Displacement | 91.4 ci [1.5 L] |
| Rated RPM | 2600 |
| Bore/Stroke | 3.43x3.31 inches [87 x 84 mm] |
| Starter volts | 12 |
| Starter | Electric |
Transmission Information of AGCO, ST34A
Transmission variants 1
| Type | Synchro shuttle |
|---|---|
| Gears | 8 forward and reverse |
Transmission variants 2
| Type | Power shuttle |
|---|---|
| Gears | 12 forward and reverse |
Transmission variants 3
| Type | Hydrostatic |
|---|---|
| Gears | Infinite forward and reverse |
- 8-speed synchro shuttle
- 12-speed power shuttle
- Hydrostatic
Mechanical Specs of AGCO, ST34A
- Four-wheel drive
- Wet disc brakes
- Power steering
- Two-post folding ROPS.
| Final drives | Spur gear |
|---|---|
| Differential lock | Mechanical rear |
Power Information of AGCO, ST34A
| Rear PTO | Independent |
|---|---|
| Mid PTO Type | 2000 |
| Rear PTO Type | 540 (1.375) |
| Mid PTO(optional) | Independent |
Hydraulics Specifications of AGCO, ST34A
| Type | Open center |
|---|---|
| Pump flow | 9.1 gpm [34.4 lpm] |
Three-Point Hitch of AGCO, ST34A
| Rear Type | I |
|---|---|
| Rear lift (at 24"/610mm) | 2535 lbs [1149 kg] |
| Control | Position control with optional draft control |
| Rear lift (at ends) | 2800 lbs [1270 kg] |
Electrical System of AGCO, ST34A
| Ground | Negative |
|---|---|
| Battery volts | 12 |
Where it sits
With 33 HP, the AGCO ST34A sits just below ST41A (40 HP) in AGCO's range. Its power puts it in the 19th percentile of 2000s models in our database (2822 machines).
Frequently asked questions
How much horsepower does the AGCO ST34A have?
The AGCO ST34A delivers 33 HP.
What years was the AGCO ST34A produced?
The AGCO ST34A was produced in 2005-2008.
What engine does the AGCO ST34A have?
The AGCO ST34A is powered by a Diesel, 3-cylinder engine.
What transmission does the AGCO ST34A use?
The AGCO ST34A uses a Synchro shuttle transmission.
How much does the AGCO ST34A weigh?
The AGCO ST34A weighs 2844 lbs [1290 kg].
Is the AGCO ST34A 4WD?
The AGCO ST34A is available in 4WD.