Introduction
Production Information of AGCO, ST41A
The production information of the tractor (ST41A) includes details about its manufacturing.
| Built in Matsuyama, Japan |
| Compact Utility tractor |
| Distributor | AGCO |
|---|---|
| Manufacturer | Iseki |
Dimension and Tires Information of AGCO, ST41A
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 70 inches [177 cm] |
|---|---|
| Shipping weight | 2888 lbs [1309 kg] |
| Height (ROPS) | 81 inches [205 cm] |
| Length | 121 inches [307 cm] |
| Ground clearance | 14 inches [35 cm] |
| Width | 62 inches [157 cm] |
No data available
Engine Specifications of AGCO, ST41A
Get the specifications for the engine and if different options are available.
| Iseki E3CD-T |
| Liquid-cooled |
| Turbocharged diesel |
| 3-cylinder |
| Power (gross) | 40.1 hp [29.9 kW] |
|---|---|
| Displacement | 91.4 ci [1.5 L] |
| Rated RPM | 2600 |
| Bore/Stroke | 3.43x3.31 inches [87 x 84 mm] |
| Starter volts | 12 |
| Starter | Electric |
Transmission Information of AGCO, ST41AY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Synchro shuttle |
|---|---|
| Gears | 8 forward and reverse |
Transmission variants 2
| Type | Power shuttle |
|---|---|
| Gears | 12 forward and reverse |
Transmission variants 3
| Type | Hydrostatic |
|---|---|
| Gears | Infinite forward and reverse |
| 8-speed synchro shuttle |
| 12-speed power shuttle |
| Hydrostatic |
Mechanical Specs of AGCO, ST41AY
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Wet disc brakes |
| Power steering |
| Two-post folding ROPS. |
| Final drives | Spur gear |
|---|---|
| Differential lock | Mechanical rear |
Power Information of AGCO, ST41AY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Mid PTO Type | 2000 |
| Rear PTO Type | 540 (1.375) |
| Mid PTO | Independent OptOptional |
Hydraulics Specifications of AGCO, ST41A
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Pump flow | 9.1 gpm [34.4 lpm] |
Three-Point Hitch of AGCO, ST41A
Hitch category and rear/front lift capacity.
| Rear Type | I |
|---|---|
| Rear lift (at 24"/610mm) | 2535 lbs [1149 kg] |
| Control | Position control with optional draft control |
| Rear lift (at ends) | 2800 lbs [1270 kg] |
Electrical System of AGCO, ST41A
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the AGCO ST41A have?
The AGCO ST41A delivers 40 HP.
What years was the AGCO ST41A produced?
The AGCO ST41A was produced in 2005-2008.
What engine does the AGCO ST41A have?
The AGCO ST41A is powered by a Turbocharged diesel, 3-cylinder engine.
What transmission does the AGCO ST41A use?
The AGCO ST41A uses a Synchro shuttle transmission.
How much does the AGCO ST41A weigh?
The AGCO ST41A weighs 2888 lbs [1309 kg].
Is the AGCO ST41A 4WD?
The AGCO ST41A is available in 4WD.