Introduction
Production Information of AGCO, ST30
The production information of the tractor (ST30) includes details about its manufacturing.
| Built in Matsuyama, Japan |
| Compact Utility tractor |
| Distributor | AGCO |
|---|---|
| Manufacturer | Iseki |
Dimension and Tires Information of AGCO, ST30
This section sums up the dimension and tires information of the tractor.
| Flange rear axle |
| Wheelbase | 65.6 inches [166 cm] |
|---|---|
| Shipping weight | 2594 lbs [1176 kg] |
| Height (ROPS) | 79.3 inches [201 cm] |
| Length | 116.5 inches [295 cm] |
| Front tread | 37.8 inches [96 cm] |
| Max weight | 4186 lbs [1898 kg] |
| Width | 55.5 inches [140 cm] |
| Rear tread | 43.1 inches [109 cm] |
| Industrial rear | 12.5/80-18 |
|---|---|
| Standard tires (ag) | Front: 6.00-14. Rear: 12.4-16 |
| Lawn/turf rear | 13.6-16 |
| Lawn/turf front | 27x8.50-15 |
| Lawn/turf front | 24x8.50-12 |
| Industrial front | 25x8.50-14 |
| Lawn/turf rear | 315/80D-16 |
Engine Specifications of AGCO, ST30
Get the specifications for the engine and if different options are available.
| Iseki E3CD |
| Liquid-cooled inline |
| Diesel |
| 3-cylinder |
| Torque RPM | 1800 |
|---|---|
| Torque | 71.6 lb-ft [97.1 Nm] |
| Coolant capacity | 7.5 qts [7.1 L] |
| Power (gross) | 30.3 hp [22.6 kW] |
| Starter | Electric |
| Air cleaner | Dry |
| Pre-heating | Glow plugs |
| Fuel system | Indirect injection |
| Displacement | 91.4 ci [1.5 L] |
| Power (net) | 29.1 hp [21.7 kW] |
| Bore/Stroke | 3.43x3.31 inches [87 x 84 mm] |
| Idle RPM | 950-2750 |
| Starter volts | 12 |
| Oil capacity | 5 qts [4.7 L] |
| Rated RPM | 2500 |
| Compression | 21.8 |
Transmission Information of AGCO, ST30Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Gear |
|---|---|
| Gears | 9 forward and 3 reverse |
| Clutch | 225mm mechanical dry disc |
Transmission variants 2
| Type | Hydrostatic |
|---|---|
| Gears | Infinite forward and reverse (3-range) |
| 9-speed gear |
| Hydrostatic |
Mechanical Specs of AGCO, ST30Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Wet disc brakes |
| Power steering |
| Two-post folding ROPS. |
| Final drives | Spur gear |
|---|---|
| Differential lock | Mechanical rear |
Power Information of AGCO, ST30Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Mid PTO Type | SAE 15 1.0 |
|---|---|
| Rear PTO | Live (gear) |
| Mid PTO | Live OptOptional |
| Engine RPM | 540@2327 |
| Independent (hydro) | |
| Engine RPM | 2000@2482 |
| Clutch | Dry disc |
| Rear PTO Type | 540 (1.375) |
Hydraulics Specifications of AGCO, ST30
Hydraulic system type, pressure, pump flow and valves.
| Steering press. | 1707 psi [117.7 bar] |
|---|---|
| Type | Open center |
| Total flow | 8.5 gpm [32.2 lpm] |
| Pump flow | 6.0 gpm [22.7 lpm] |
| Capacity | 3.2 gal [12.1 L] |
| Steering flow | 2.5 gpm [9.5 lpm] |
| Pressure | 2130 psi [146.9 bar] |
Three-Point Hitch of AGCO, ST30
Hitch category and rear/front lift capacity.
| Rear Type | I |
|---|---|
| Rear lift (at 24"/610mm) | 1201 lbs [544 kg] |
| Rear lift (at ends) | 1984 lbs [899 kg] |
| Control | Position control |
| Rear Arms | Fixed link ends with turn-buckle stabilizers |
| Draft control OptOptional |
Electrical System of AGCO, ST30
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Battery CCA | 582 |
| Charging system | Alternator |
| Charging amps | 40 |
Frequently asked questions
How much horsepower does the AGCO ST30 have?
The AGCO ST30 delivers 30 HP.
What years was the AGCO ST30 produced?
The AGCO ST30 was produced in 2001-2004.
What engine does the AGCO ST30 have?
The AGCO ST30 is powered by a Diesel, 3-cylinder engine.
What transmission does the AGCO ST30 use?
The AGCO ST30 uses a Gear transmission.
How much does the AGCO ST30 weigh?
The AGCO ST30 weighs 2594 lbs [1176 kg].
Is the AGCO ST30 4WD?
The AGCO ST30 is available in 4WD.