
AGCO ST24A
Power
22 hp
Production
2005-2008
Engine
Diesel, 3-cylinder
Transmission
Hydrostatic
Weight
1565 lbs [709 kg]
Drive
4WD
From the same series:
Introduction
Production Information of AGCO, ST24A
The production information of the tractor (ST24A) includes details about its manufacturing.
| Built in Matsuyama, Japan |
| Compact Utility tractor |
| Distributor | AGCO |
|---|---|
| Manufacturer | Iseki |
Dimension and Tires Information of AGCO, ST24A
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 59.9 inches [152 cm] |
|---|---|
| Shipping weight | 1565 lbs [709 kg] |
| Height | 77.2 inches [196 cm] |
| Length | 105.5 inches [267 cm] |
| Width | 39.4 inches [100 cm] |
No data available
Engine Specifications of AGCO, ST24A
Get the specifications for the engine and if different options are available.
| Iseki |
| Liquid-cooled |
| Diesel |
| 3-cylinder |
| Power (gross) | 22.5 hp [16.8 kW] |
|---|---|
| Displacement | 68.5 ci [1.1 L] |
| Rated RPM | 2600 |
| Bore/Stroke | 3.08x3.07 inches [78 x 78 mm] |
| Starter volts | 12 |
| Starter | Electric |
Transmission Information of AGCO, ST24AY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Hydrostatic |
|---|---|
| Gears | Infinite forward and reverse |
Transmission variants 2
| Type | Gear |
|---|---|
| Gears | 6 forward and 2 reverse |
| Hydrostatic |
| 6-speed gear |
Mechanical Specs of AGCO, ST24AY
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Two-post fixed ROPS. |
| Wet disc brakes |
| Power steering |
| Differential lock | Mechanical rear |
|---|
Power Information of AGCO, ST24AY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Transmission (gear) |
|---|---|
| Mid PTO Type | 2000 |
| Mid PTO | Independent OptOptional |
| Independent (hydrostatic) | |
| Rear PTO Type | 540 (1.375) |
Hydraulics Specifications of AGCO, ST24A
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Pump flow | 5.3 gpm [20.1 lpm] |
Three-Point Hitch of AGCO, ST24A
Hitch category and rear/front lift capacity.
| Rear Type | I |
|---|---|
| Rear lift (at ends) | 1213 lbs [550 kg] |
| Rear lift (at 24"/610mm) | 882 lbs [400 kg] |
Electrical System of AGCO, ST24A
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the AGCO ST24A have?
The AGCO ST24A delivers 22 HP.
What years was the AGCO ST24A produced?
The AGCO ST24A was produced in 2005-2008.
What engine does the AGCO ST24A have?
The AGCO ST24A is powered by a Diesel, 3-cylinder engine.
What transmission does the AGCO ST24A use?
The AGCO ST24A uses a Hydrostatic transmission.
How much does the AGCO ST24A weigh?
The AGCO ST24A weighs 1565 lbs [709 kg].
Is the AGCO ST24A 4WD?
The AGCO ST24A is available in 4WD.