Introduction
Production Information of Allis Chalmers, 5030
The production information of the tractor (5030) includes details about its manufacturing.
| Original price was $9,230 in 1985 |
| Built in Osaka, Japan |
| Compact Utility tractor |
| Distributor | Allis Chalmers |
|---|---|
| Manufacturer | Hinomoto |
Dimension and Tires Information of Allis Chalmers, 5030
This section sums up the dimension and tires information of the tractor.
| Rear tread | 40.9 to 62.5 inches [103 to 158 cm] |
|---|---|
| Wheelbase | 61.8 inches [156 cm] |
| Clearance (rear axle) | 15.6 inches [39 cm] |
| Clearance (front axle) | 14.5 inches [36 cm] |
| Length | 100.4 inches [255 cm] |
| Front tread | 40.9 to 51.1 inches [103 to 129 cm] |
| Width | 53.5 inches [135 cm] |
| Ag front | 5.00-15 |
|---|---|
| 20x8.00-10 | |
| Lawn/turf rear | 13.6-16 |
| Ag rear | 12.4-24 |
| Lawn/turf front | 20x8.00-10 |
Engine Specifications of Allis Chalmers, 5030
Get the specifications for the engine and if different options are available.
| Liquid-cooled |
| Coolant capacity | 5.3 qts [5.0 L] |
|---|---|
| Air cleaner | Dry |
| Compression | 23:1 |
| Idle RPM | 750-2750 |
| Rated RPM | 2500 |
| Displacement | 90.1 ci [1.5 L] |
| Oil capacity | 5 qts [4.7 L] |
| Power | 31 hp [23.1 kW] |
| Oil change | 100 h |
| Bore/Stroke | 3.82x3.94 inches [97 x 100 mm] |
| Starter volts | 12 |
| Starter | Electric |
| Firing order | 1-2 |
Transmission Information of Allis Chalmers, 5030Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Four gears (1-4) in two ranges (low/high). Tractor must be stopped, and clutch used, to shift gears or range. |
| Type | Unsynchronized gear |
|---|---|
| Oil capacity | 26.8 qts [25.4 L] |
| Gears | 8 forward and 2 reverse |
| Clutch | 215mm dry disc |
Transmission variants 2
| Four gears, plus reverse, with high, low, and creeper ranges. |
| Type | Unsynchronized gear |
|---|---|
| Oil capacity | 22 qts [20.8 L] |
| Gears | 12 forward and 3 reverse |
| Clutch | 215mm dry disc |
| 8-speed unsynchronized gear |
| 12-speed unsynchronized gear |
Mechanical Specs of Allis Chalmers, 5030Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Two-post ROPS, optional ROPS canopy |
| Manual steering |
| Differential mechanical drum and shoe brakes |
Power Information of Allis Chalmers, 5030Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Transmission |
|---|---|
| Engine RPM | 540@2320 |
| Live OptOptional | |
| Rear PTO Type | 540 |
Hydraulics Specifications of Allis Chalmers, 5030
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Pump flow | 5.44 gpm [20.6 lpm] |
| Capacity | 6.7 gal [25.4 L] |
| Valves | 0 or 1 |
Three-Point Hitch of Allis Chalmers, 5030
Hitch category and rear/front lift capacity.
| Rear Type | I |
|---|
Electrical System of Allis Chalmers, 5030
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery AH | 70 |
| Battery volts | 12 |
| Charging system | Alternator |
| Charging amps | 12 |
Frequently asked questions
How much horsepower does the Allis Chalmers 5030 have?
The Allis Chalmers 5030 delivers 31 HP.
What years was the Allis Chalmers 5030 produced?
The Allis Chalmers 5030 was produced in 1979-1985.
What transmission does the Allis Chalmers 5030 use?
The Allis Chalmers 5030 uses a Unsynchronized gear transmission.
Is the Allis Chalmers 5030 4WD?
The Allis Chalmers 5030 is available in 2WD.