Introduction
Production Information of Allis Chalmers, D12
The production information of the tractor (D12) includes details about its manufacturing.
| Row-Crop tractor |
| Built in West Allis, Wisconsin, USA |
| Manufacturer | Allis Chalmers |
|---|---|
| Original price | $3,522 (1968) |
Dimension and Tires Information of Allis Chalmers, D12
This section sums up the dimension and tires information of the tractor.
| Clearance (front axle) | 20.25 inches [51 cm] |
|---|---|
| Wheelbase | 78.75 inches [200 cm] |
| Shipping weight | 2,800 lbs [1270 kg] |
| Height (exhaust) | 76.5 inches [194 cm] |
| Length | 121 inches [307 cm] |
| Clearance (rear axle) | 22.25 inches [56 cm] |
| Ballasted weight | 5,630 lbs [2553 kg] |
| Height (hood) | 52.5 inches [133 cm] |
| Rear tread | 52 to 79.25 inches [132 to 201 cm] |
| Front tread | 49.3 to 80 inches [125 to 203 cm] |
| Ag front | 5.00x15 |
|---|---|
| Ag rear | 10x24 |
| Ag rear | 11x24 |
Engine Specifications of Allis Chalmers, D12
Get the specifications for the engine and if different options are available.
| Allis-Chalmers |
| Liquid-cooled |
| 4-cylinder |
| Gasoline |
| The larger, 149 cubic inch, engine was introduced on the D12 at serial number 3001 in 1961. |
| Air cleaner | Oil bath |
|---|---|
| Firing order | 1-2-4-3 |
| Displacement | 149 ci [2.4 L] |
| Bore/Stroke | 3.50x3.875 inches [89 x 98 mm] |
| Rated RPM | 1650 |
| Compression | 7.5:1 |
| Coolant capacity | 8 qts [7.6 L] |
| Oil capacity | 4 qts [3.8 L] |
| Starter volts | 6 |
Transmission Information of Allis Chalmers, D12Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Sliding gear |
|---|---|
| Gears | 4 forward and 1 reverse |
Mechanical Specs of Allis Chalmers, D12Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Open operator station. |
Power Information of Allis Chalmers, D12Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO Type | 540 |
|---|
Hydraulics Specifications of Allis Chalmers, D12
Hydraulic system type, pressure, pump flow and valves.
| Type | Live |
|---|---|
| Valves | 1 or 2 |
Three-Point Hitch of Allis Chalmers, D12
Hitch category and rear/front lift capacity.
| Rear Type | I |
|---|---|
| Type | Snap-Couple |
Frequently asked questions
How much horsepower does the Allis Chalmers D12 have?
The Allis Chalmers D12 delivers 31 HP.
What years was the Allis Chalmers D12 produced?
The Allis Chalmers D12 was produced in 1959-1968.
What engine does the Allis Chalmers D12 have?
The Allis Chalmers D12 is powered by a Gasoline, 4-cylinder engine.
What transmission does the Allis Chalmers D12 use?
The Allis Chalmers D12 uses a Sliding gear transmission.
How much does the Allis Chalmers D12 weigh?
The Allis Chalmers D12 weighs 2,800 lbs [1270 kg].
Is the Allis Chalmers D12 4WD?
The Allis Chalmers D12 is available in 2WD.