Introduction
Production Information of Allis Chalmers, D10
The production information of the tractor (D10) includes details about its manufacturing.
| Row-Crop tractor |
| Built in West Allis, Wisconsin, USA |
| Manufacturer | Allis Chalmers |
|---|---|
| Original price | $3400 (1967) |
| Total built | 9,100 |
Dimension and Tires Information of Allis Chalmers, D10
This section sums up the dimension and tires information of the tractor.
| Clearance (front axle) | 21 inches [53 cm] |
|---|---|
| Wheelbase | 78.75 inches [200 cm] |
| Shipping weight | 2,700 lbs [1224 kg] |
| Height (exhaust) | 76 inches [193 cm] |
| Length | 120.5 inches [306 cm] |
| Clearance (rear axle) | 22.25 inches [56 cm] |
| Ballasted weight | 4,800 lbs [2177 kg] |
| Height (hood) | 52 inches [132 cm] |
| Rear tread | 42 to 72 inches [106 to 182 cm] |
| Front tread | 40 to 64.7 inches [101 to 164 cm] |
| Ag front | 4.00x15 |
|---|---|
| Ag rear | 10x24 |
| Ag rear | 9x24 |
| Ag front | 5.00x15 |
Engine Specifications of Allis Chalmers, D10
Get the specifications for the engine and if different options are available.
| Allis-Chalmers |
| Liquid-cooled |
| 4-cylinder |
| Gasoline |
| The larger, 149 cubic inch, engine was introduced at serial number 3501 in 1961. |
| Air cleaner | Oil bath |
|---|---|
| Firing order | 1-2-4-3 |
| Displacement | 149 ci [2.4 L] |
| Bore/Stroke | 3.50x3.875 inches [89 x 98 mm] |
| Rated RPM | 1650 |
| Compression | 7.5:1 |
| Coolant capacity | 8 qts [7.6 L] |
| Oil capacity | 4 qts [3.8 L] |
| Starter volts | 12 |
Transmission Information of Allis Chalmers, D10Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Sliding gear |
|---|---|
| Gears | 4 forward and 1 reverse |
Mechanical Specs of Allis Chalmers, D10Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Open operator station |
| Differential mechanical shoe brakes |
| Steering | Manual |
|---|
Power Information of Allis Chalmers, D10Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Transmission , independent (later) (original) |
|---|---|
| Rear PTO Type | 540 |
Hydraulics Specifications of Allis Chalmers, D10
Hydraulic system type, pressure, pump flow and valves.
| Type | Live |
|---|---|
| Valves | 1 or 2 |
Three-Point Hitch of Allis Chalmers, D10
Hitch category and rear/front lift capacity.
| Rear Type | I |
|---|---|
| Type | Snap-Couple |
Frequently asked questions
How much horsepower does the Allis Chalmers D10 have?
The Allis Chalmers D10 delivers 31 HP.
What years was the Allis Chalmers D10 produced?
The Allis Chalmers D10 was produced in 1959-1968.
What engine does the Allis Chalmers D10 have?
The Allis Chalmers D10 is powered by a Gasoline, 4-cylinder engine.
What transmission does the Allis Chalmers D10 use?
The Allis Chalmers D10 uses a Sliding gear transmission.
How much does the Allis Chalmers D10 weigh?
The Allis Chalmers D10 weighs 2,700 lbs [1224 kg].
Is the Allis Chalmers D10 4WD?
The Allis Chalmers D10 is available in 2WD.