Allis Chalmers 7060

Name: Allis Chalmers 7060
Brand: Allis Chalmers

Power

192 hp

Production

1974-1981

Engine

6-cylinder

Transmission

Allis-Chalmers Power Director

Drive

2WD

140–200 HP 1970s 1980s

From the same series:

7045

7080

Introduction

Allis-Chalmers 7060 Row-Crop Tractor

The Allis-Chalmers 7060 is a row-crop tractor produced in West Allis, Wisconsin, between 1974 and 1981. It was designed for heavy-duty agricultural operations and served as a central model within the manufacturer's 7000 series lineup.

Engine and Performance

The tractor is powered by a 6-cylinder liquid-cooled engine with a displacement of 426 cubic inches (7.0 liters). It features a 16:1 compression ratio and is rated at 2,300 RPM, delivering 192 horsepower. The engine utilizes a dry air cleaner with a pre-cleaner system to maintain efficiency in dusty environments.

Transmission and Drivetrain

Two transmission options were available: the Allis-Chalmers Power Director (20 forward and 4 reverse gears) and the Power Shift (12 forward and 2 reverse gears). Both are partial power shift units requiring clutch usage for range changes or direction reversing. The tractor features a two-wheel-drive configuration with inboard planetary final drives and differential power wet disc brakes.

Hydraulics and Hitch

The 7060 utilizes a closed-center hydraulic system providing a total flow of 45 gallons per minute (170.3 liters per minute), with 22 gpm allocated to pump flow and 9.5 gpm to steering. The rear hitch is a category 3/2 configuration capable of lifting 6,680 lbs (3,030 kg) at 24 inches behind the lift point.

Operator Environment and Dimensions

The machine was equipped with the Accousta cab as standard, with an optional air conditioning system. In 1978, the Accousta Cab II was introduced alongside ergonomic improvements. The tractor has a wheelbase of 106 inches and a ground clearance of 22 inches under the front axle, supporting various agricultural tire configurations.

Conclusion

"The Allis-Chalmers 7060 is a robust, high-horsepower tractor engineered for demanding field tasks. Its combination of a powerful 192 hp engine and versatile transmission options makes it suitable for large-scale crop production, reflecting the design standards of its era."

Introduction

Production Information of Allis Chalmers, 7060

The production information of the tractor (7060) includes details about its manufacturing.

Row-Crop tractor

In 1978, serial number 6001, the Allis Chalmers model 7060 received the new Accousta Cab II with console shift, new seating, and new lighting. The tractor's color changed from an orange chassis to black.

Built in West Allis, Wisconsin, USA


Manufacturer	Allis Chalmers
Original price	$48,696
Total built	7,796

Dimension and Tires Information of Allis Chalmers, 7060

This section sums up the dimension and tires information of the tractor.


Rear axle	3.75 inch diameter [95 mm]
Wheelbase	106 inches [269 cm]
Ground clearance	22 inches (front axle) [55 cm]
	119.5 inches (optional long axle) [303 cm]
Length	163 inches [414 cm]
Rear axle	4.00 inch diameter [101 mm]
	28 inches (rear axle) [71 cm]
Width	95.5 inches [242 cm]


	18.4x42
Ag front	11.00x16
Ag rear	23.1x30
	14Lx16
Ag rear	18.4x38
	15.5x38
	24.5x32
Ag front	10.00x16
	20.8x38
	16.9x38
	30.5x32

Engine Specifications of Allis Chalmers, 7060

Get the specifications for the engine and if different options are available.

Liquid-cooled Inline

6-cylinder


Exhaust valve clearance	0.015 inches (hot) [0.381 mm]
Air cleaner	Dry with pre-cleaner
Compression	16:1
Firing order	1-5-3-6-2-4
Rated RPM	2300
Displacement	426 ci [7.0 L]
Oil capacity	25 qts [23.7 L]
Power	192 hp [143.2 kW]
Bore/Stroke	4.25x5.00 inches [108 x 127 mm]
Intake valve clearance	0.015 inches (hot) [0.381 mm]
Coolant capacity	32 qts [30.3 L]
Starter volts	12

Transmission Information of Allis Chalmers, 7060Y

Discover all variants of transmission available for this tractor model.

Transmission variants 1

The Power Director uses a gear shift, range shift, and the two-speed Power Director. The gear shift lever selects one of five forward gears, or reverse. The range shift lever selects between high and low ranges. The tractor must be stopped, and the clutch pedal used, to change the gear or range. Once in motion, the Power Director is operated by means of two foot switches that can be switched, on the move, without the clutch.


Transmission	Allis-Chalmers Power Director
Oil type	Allis-Chalmers Power Fluid 821
Oil capacity	29.6 qts [28.0 L]
Type	Partial power shift
	Allis-Chalmers Power Fluid 821
Gears	20 forward and 4 reverse

Transmission variants 2

The power shift transmission uses a gear shift and range shift. The range shift lever selects one of two ranges. The tractor must be stopped, and the clutch used, to change the range. The gear shift selects one of six forward gears, and reverse. The gears can be shifted while the tractor is in motion, simply by moving the lever. The clutch is needed to switch from a forward gear to reverse.


Transmission	Allis-Chalmers Power Shift
Oil type	Allis-Chalmers Power Fluid 821
Oil capacity	28 qts [26.5 L]
Type	Partial power shift
	Allis-Chalmers Power Fluid 821
Gears	12 forward and 2 reverse

20-speed partial power shift

12-speed partial power shift

Mechanical Specs of Allis Chalmers, 7060Y

This section summarizes all mechanical information such as the brake system and other specifications.

Two-wheel drive

Accousta cab standard, A/C optional. Accousta cab II available in 1978.

Differential power wet disc brakes


Final drives	Inboard planetary
Steering	Hydrostatic power

Power Information of Allis Chalmers, 7060Y

Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.


Rear PTO	Independent
Rear PTO Type	1000
	540/1000 (optional)

Hydraulics Specifications of Allis Chalmers, 7060

Hydraulic system type, pressure, pump flow and valves.


Type	Closed center
Steering flow	9.5 gpm [36.0 lpm]
Total flow	45 gpm [170.3 lpm]
Valves	2 or 3
Pump flow	22 gpm [83.3 lpm]

Three-Point Hitch of Allis Chalmers, 7060

Hitch category and rear/front lift capacity.


Rear Type	3/2
Rear lift (at 24"/610mm)	6,680 lbs [3030 kg]

Electrical System of Allis Chalmers, 7060

Battery voltage, charging system and ground.


Ground	Negative
Battery volts	12
Batteries	2
	4 (optional)

Frequently asked questions

How much horsepower does the Allis Chalmers 7060 have?

The Allis Chalmers 7060 delivers 192 HP.

What years was the Allis Chalmers 7060 produced?

The Allis Chalmers 7060 was produced in 1974-1981.

What engine does the Allis Chalmers 7060 have?

The Allis Chalmers 7060 is powered by a 6-cylinder engine.

What transmission does the Allis Chalmers 7060 use?

The Allis Chalmers 7060 uses a Allis-Chalmers Power Director transmission.

Is the Allis Chalmers 7060 4WD?

The Allis Chalmers 7060 is available in 2WD.

More Allis Chalmers models

8070189 HP · 1982 - 1985 7580206 HP · 1976 - 1981 HD20175 HP · 1951 - 1954 7080210 HP · 1975 - 1981 7045173 HP · 1978 - 1981 7050173 HP · 1973 - 1974 8050169 HP · 1982 - 1985 440218 HP · 1973 - 1977

View all 94 Allis Chalmers models →

Compare the Allis Chalmers 7060 with another model

Popular comparisons

vs AGCO Allis 9170 vs John Deere 6R 195 vs McCormick Intl XTX215 vs Steyr 6190 CVT vs Claas Axion 800 vs Deutz-Allis 9170