Allis Chalmers 7080
Power
210 hp
Production
1975-1981
Engine
Intercooled turbocharged diesel, 6-cylinder
Transmission
Allis-Chalmers Power Director
Weight
13638 lbs [6186 kg]
Drive
2WD
From the same series:
Introduction
Production Information of Allis Chalmers, 7080
The production information of the tractor (7080) includes details about its manufacturing.
| Row-Crop tractor |
| Built in West Allis, Wisconsin, USA |
| Manufacturer | Allis Chalmers |
|---|---|
| Original price | $54,561 |
Dimension and Tires Information of Allis Chalmers, 7080
This section sums up the dimension and tires information of the tractor.
| 29 inches (rear axle) [73 cm] | |
| Wheelbase | 106 inches [269 cm] |
| Weight | 13638 lbs [6186 kg] |
| 119.5 inches (optional long axle) [303 cm] | |
| Length | 163 inches [414 cm] |
| Rear axle | 4.00 inch diameter [101 mm] |
| Ground clearance | 22 inches (front axle) [55 cm] |
| Width | 95.5 inches [242 cm] |
| 18.4x42 | |
| Ag front | 14Lx16 |
| Ag rear | 23.1x30 |
| 18.4x16 | |
| Ag rear | 20.8x38 |
| 15.5x38 | |
| 24.5x32 | |
| Ag front | 11.00x16 |
| 20.8x38 | |
| 16.9x38 | |
| 30.5x32 |
Engine Specifications of Allis Chalmers, 7080
Get the specifications for the engine and if different options are available.
| Allis Chalmers 670HI |
| Liquid-cooled |
| Intercooled turbocharged diesel |
| 6-cylinder |
| Starter volts | 12 |
|---|---|
| Displacement | 426 ci [7.0 L] |
| Air cleaner | Dry with pre-cleaner |
| Bore/Stroke | 4.25x5.00 inches [108 x 127 mm] |
| Coolant capacity | 36 qts [34.1 L] |
| Oil capacity | 25 qts [23.7 L] |
| Rated RPM | 2550 |
| Compression | 16:1 |
| Power | 210 hp [156.6 kW] |
Transmission Information of Allis Chalmers, 7080Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Five gears, plus reverse, with two ranges (fast/slow) and two-range power shift (lo/hi). Power shift controlled by foot buttons. |
| Transmission | Allis-Chalmers Power Director |
|---|---|
| Oil capacity | 29.6 qts [28.0 L] |
| Type | Partial power shift |
| Gears | 20 forward and 4 reverse |
Mechanical Specs of Allis Chalmers, 7080Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Acousta cab standard with heat, air-conditioning optional. Radio and 8-track player optional. Four-post ROPS canopy available. |
| Differential hydraulic wet disc brakes |
| Power steering |
| Final drives | Inboard planetary |
|---|
Power Information of Allis Chalmers, 7080Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 1000 |
Hydraulics Specifications of Allis Chalmers, 7080
Hydraulic system type, pressure, pump flow and valves.
| Type | Closed center |
|---|---|
| Steering flow | 10 gpm [37.9 lpm] |
| Total flow | 47 gpm [177.9 lpm] |
| Valves | 2 or 3 |
| Pump flow | 23 gpm [87.1 lpm] |
Three-Point Hitch of Allis Chalmers, 7080
Hitch category and rear/front lift capacity.
| Rear Type | 3/2 |
|---|---|
| Rear lift (at 24"/610mm) | 6,680 lbs [3030 kg] |
Frequently asked questions
How much horsepower does the Allis Chalmers 7080 have?
The Allis Chalmers 7080 delivers 210 HP.
What years was the Allis Chalmers 7080 produced?
The Allis Chalmers 7080 was produced in 1975-1981.
What engine does the Allis Chalmers 7080 have?
The Allis Chalmers 7080 is powered by a Intercooled turbocharged diesel, 6-cylinder engine.
What transmission does the Allis Chalmers 7080 use?
The Allis Chalmers 7080 uses a Allis-Chalmers Power Director transmission.
How much does the Allis Chalmers 7080 weigh?
The Allis Chalmers 7080 weighs 13638 lbs [6186 kg].
Is the Allis Chalmers 7080 4WD?
The Allis Chalmers 7080 is available in 2WD.