Allis Chalmers 8070 tractor

Allis Chalmers 8070

Power

189 hp[P] hp

Production

1982-1985

Engine

Turbocharged intercooled diesel, 6-cylinder

Transmission

Allis-Chalmers Power Director

Drive

2WD/4WD

From the same series:

8050

Introduction

Production Information of Allis Chalmers, 8070

The production information of the tractor (8070) includes details about its manufacturing.

Row-Crop tractor
Built in West Allis, Wisconsin, USA
ManufacturerAllis Chalmers
Original price$60,337
Total built2,354

Dimension and Tires Information of Allis Chalmers, 8070

This section sums up the dimension and tires information of the tractor.

Wheelbase106 inches [269 cm]
Ground clearance22 inches (front axle) [55 cm]
119.5 inches (long axle) [303 cm]
Length187 inches [474 cm]
29 inches (rear axle) [73 cm]
Width95.5 inches [242 cm]
16.9-38
Ag front10.00-16 (2WD)
14L-16 (2WD)
Ag front11.00-16 (2WD)
13.6-28 (4WD)
14.9-24 (4WD)
18.4-16 (2WD)
Ag rear18.4-38
18.4-42
Ag rear20.8-38
14.9-28 (4WD)

Engine Specifications of Allis Chalmers, 8070

Get the specifications for the engine and if different options are available.

Allis Chalmers 670I
Liquid-cooled inline
Turbocharged intercooled diesel
6-cylinder
Oil capacity19 qts [18.0 L]
Displacement426 ci [7.0 L]
Compression15.5:1
Bore/Stroke4.25x5.00 inches [108 x 127 mm]
Coolant capacity36 qts [34.1 L]
21 qts (3 filter) [19.9 L]
Starter volts12
Rated RPM2400
Air cleanerDry

Transmission Information of Allis Chalmers, 8070Y

Discover all variants of transmission available for this tractor model.

Transmission variants 1

Five gears (1-5) in two ranges (slow/fast) with a two-speed power shift (low/high) controlled by left-hand lever.
TransmissionAllis-Chalmers Power Director
Oil capacity29.6 qts [28.0 L]
TypePartial power shift
Gears20 forward and 4 reverse

Transmission variants 2

Six power shift gears (1-6) in two ranges (slow/fast). Clutch must be used to shift range. Pressing the clutch pedal half-way automatically downshifts from 5th/6th to 4th gear.
TransmissionPower Shift
Oil capacity29.6 qts [28.0 L]
TypeAllis-Chalmers
Gears12 forward and 2 reverse
20-speed partial power shift
12-speed Allis-Chalmers

Mechanical Specs of Allis Chalmers, 8070Y

This section summarizes all mechanical information such as the brake system and other specifications.

Two- or four-wheel drive
Acousta cab standard with heat and air-conditioning. Optional radio and cassette tape player.
Differential hydraulic wet discs brakes
Differential lockElectro-hydraulic rear
SteeringHydrostatic power

Power Information of Allis Chalmers, 8070Y

Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.

Rear PTOIndependent
Rear PTO Type1000

Hydraulics Specifications of Allis Chalmers, 8070

Hydraulic system type, pressure, pump flow and valves.

TypeClosed-center load-sensitive
Total flow45 gpm [170.3 lpm]
13.5 gpm (transmission) [51.1 lpm]
Valves2 or 3
Steering flow9.5 gpm [36.0 lpm]
Pump flow22 gpm [83.3 lpm]

Three-Point Hitch of Allis Chalmers, 8070

Hitch category and rear/front lift capacity.

Rear TypeIII/II
Rear lift (at 24"/610mm)8,200 lbs [3719 kg]

Electrical System of Allis Chalmers, 8070

Battery voltage, charging system and ground.

Charging systemAlternator
Charging amps100
Battery volts12

Frequently asked questions

How much horsepower does the Allis Chalmers 8070 have?

The Allis Chalmers 8070 delivers 189 hp[P] HP.

What years was the Allis Chalmers 8070 produced?

The Allis Chalmers 8070 was produced in 1982-1985.

What engine does the Allis Chalmers 8070 have?

The Allis Chalmers 8070 is powered by a Turbocharged intercooled diesel, 6-cylinder engine.

What transmission does the Allis Chalmers 8070 use?

The Allis Chalmers 8070 uses a Allis-Chalmers Power Director transmission.

Is the Allis Chalmers 8070 4WD?

The Allis Chalmers 8070 is available in 2WD/4WD.

Compare the Allis Chalmers 8070 with another model