Introduction
Production Information of Allis Chalmers, ED40
The production information of the tractor (ED40) includes details about its manufacturing.
| Utility tractor |
| Built in Essendine, Lincolnshire, England |
| Manufacturer | Allis Chalmers |
|---|
Dimension and Tires Information of Allis Chalmers, ED40
This section sums up the dimension and tires information of the tractor.
| Front tread | 48 to 70 inches [121 to 177 cm] |
|---|---|
| Wheelbase | 76.4 inches [194 cm] |
| Height (exhaust) | 68 inches [172 cm] |
| Height (hood) | 57.1 inches [145 cm] |
| Length | 114 inches [289 cm] |
| Rear tread | 48 to 72 inches [121 to 182 cm] |
| Weight | 3527 lbs [1599 kg] |
| Width | 63 inches*Minimum width. [160 cm] |
| Ag front | 4.00x19 |
|---|---|
| 11x28 | |
| 6.00x16 | |
| Ag rear | 10x28 |
Engine Specifications of Allis Chalmers, ED40
Get the specifications for the engine and if different options are available.
| Standard Ricardo 23C |
| Liquid-cooled |
| Diesel |
| 4-cylinder |
| Oil capacity | 7.2 qts [6.8 L] |
|---|---|
| Displacement | 137.89 ci [2.3 L] |
| Pre-heating | Glow plugs |
| Bore/Stroke | 3.3125x4.00 inches [84 x 102 mm] |
| Starter volts | 12 |
| Rated RPM | 2000 |
| Power | 41 hp [30.6 kW] |
Transmission Information of Allis Chalmers, ED40Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Gear |
|---|---|
| Oil capacity | 32.4 qts [30.7 L] |
| Gears | 8 forward and 2 reverse |
| Clutch | 254mm dry disc |
Mechanical Specs of Allis Chalmers, ED40Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Open operator station. |
| Mechanical drum brakes |
| Manual steering |
| Differential lock | Mechanical rear |
|---|
Power Information of Allis Chalmers, ED40Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Live OptOptional |
|---|---|
| Rear PTO Type | 540 (1.375) |
| Engine RPM | 540@1700 |
Hydraulics Specifications of Allis Chalmers, ED40
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Pressure | 2500 psi [172.4 bar] |
| Pump flow | 6.4 gpm [24.2 lpm] |
Three-Point Hitch of Allis Chalmers, ED40
Hitch category and rear/front lift capacity.
| Rear Type | I |
|---|---|
| Rear lift (at ends) | 2500 lbs [1134 kg] |
Frequently asked questions
How much horsepower does the Allis Chalmers ED40 have?
The Allis Chalmers ED40 delivers 41 HP.
What years was the Allis Chalmers ED40 produced?
The Allis Chalmers ED40 was produced in 1960-1968.
What engine does the Allis Chalmers ED40 have?
The Allis Chalmers ED40 is powered by a Diesel, 4-cylinder engine.
What transmission does the Allis Chalmers ED40 use?
The Allis Chalmers ED40 uses a Gear transmission.
How much does the Allis Chalmers ED40 weigh?
The Allis Chalmers ED40 weighs 3527 lbs [1599 kg].
Is the Allis Chalmers ED40 4WD?
The Allis Chalmers ED40 is available in 2WD.