Introduction
Production Information of Allis Chalmers, 6040
The production information of the tractor (6040) includes details about its manufacturing.
| The Allis-Chalmers 160 was built by Renault. It was based on the model 421, but used a Perkins diesel in place of the MWM. |
| Built in France |
| Utility tractor |
| Distributor | Allis Chalmers |
|---|---|
| Total built | 499 |
| Manufacturer | Renault |
| Original price | $6,934 |
Dimension and Tires Information of Allis Chalmers, 6040
This section sums up the dimension and tires information of the tractor.
| Rear tread | 50 to 78 inches [127 to 198 cm] |
|---|---|
| Wheelbase | 79 inches [200 cm] |
| Clearance (rear axle) | 21 inches [53 cm] |
| Clearance (front axle) | 16 inches [40 cm] |
| Length | 128 inches [325 cm] |
| Front tread | 48 to 75 inches [121 to 190 cm] |
| Width | 65 inches [165 cm] |
| Ag front | 6.00-16 |
|---|---|
| Ag rear | 14.9-28 |
| Ag rear | 14.9-28 |
Engine Specifications of Allis Chalmers, 6040
Get the specifications for the engine and if different options are available.
| Liquid-cooled inline |
| Starter | Electric |
|---|---|
| Displacement | 152.7 ci [2.5 L] |
| Oil capacity | 6.5 qts [6.2 L] |
| Compression | 18.5:1 |
| Bore/Stroke | 3.60x5.00 inches [91 x 127 mm] |
| Oil change | 75 h |
| Coolant capacity | 8 qts [7.6 L] |
| Starter volts | 12 |
| Idle RPM | 725-2475 |
| Rated RPM | 2250 |
| Air cleaner | Paper element |
Transmission Information of Allis Chalmers, 6040Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Six gears, plus reverse, in two ranges. Gears 9 and 10 are synchronized and only available in high range. |
| Type | Partial synchronized |
|---|---|
| Oil capacity | 29 qts [27.4 L] |
| Gears | 10 forward and 2 reverse |
| Clutch | 254mm dry disc |
Mechanical Specs of Allis Chalmers, 6040Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Open operator station. Two-post fixed ROPS available. |
| Differential mechanical dry disc brakes |
| Power steering |
| Differential lock | Mechanical rear |
|---|
Power Information of Allis Chalmers, 6040Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Live |
|---|---|
| Engine RPM | 540@2160 |
| Clutch | Dry disc |
| Rear PTO Type | 540 (1.375) |
Hydraulics Specifications of Allis Chalmers, 6040
Hydraulic system type, pressure, pump flow and valves.
| Steering press. | 1100 psi [75.8 bar] |
|---|---|
| Type | Open center |
| Total flow | 13.2 gpm [50.0 lpm] |
| Pump flow | 6.7 gpm [25.4 lpm] |
| Capacity | 7.25 gal [27.4 L] |
| Steering flow | 7.5 gpm [28.4 lpm] |
| Pressure | 2300 psi [158.6 bar] |
Three-Point Hitch of Allis Chalmers, 6040
Hitch category and rear/front lift capacity.
| Rear Type | II |
|---|---|
| Control | Lower-link draft sensing |
Electrical System of Allis Chalmers, 6040
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Charging system | Alternator |
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the Allis Chalmers 6040 have?
The Allis Chalmers 6040 delivers 44 hp[P] HP.
What years was the Allis Chalmers 6040 produced?
The Allis Chalmers 6040 was produced in 1974-1975.
What transmission does the Allis Chalmers 6040 use?
The Allis Chalmers 6040 uses a Partial synchronized transmission.
Is the Allis Chalmers 6040 4WD?
The Allis Chalmers 6040 is available in 2WD.