Introduction
Production Information of Belarus, MTZ-80
The production information of the tractor (MTZ-80) includes details about its manufacturing.
| Row-Crop tractor |
| Built in Minsk, Belarus |
| Manufacturer | Belarus |
|---|
Dimension and Tires Information of Belarus, MTZ-80
This section sums up the dimension and tires information of the tractor.
| Ground clearance | 18.3 inches [46 cm] |
|---|---|
| Wheelbase | 93.3 inches [236 cm] |
| Operating weight | 7,840 lbs [3556 kg] |
| Height | 97.2 inches [246 cm] |
| Length | 150 inches [381 cm] |
| Front tread | 47.2 to 70.9 inches [119 to 180 cm] |
| Ballasted weight | 11,575 lbs [5250 kg] |
| Width | 77.6 inches [197 cm] |
| Rear tread | 53.2 to 82.9 inches [135 to 210 cm] |
| Ag front | 7.50-20 |
|---|---|
| Ag rear | 15.5-38 |
Engine Specifications of Belarus, MTZ-80
Get the specifications for the engine and if different options are available.
| MTZ D240 |
| Liquid-cooled |
| Diesel |
| 4-cylinder |
| Torque | 202.8 lb-ft [275.0 Nm] |
|---|---|
| Displacement | 289.8 ci [4.7 L] |
| Air cleaner | Oil bath |
| Bore/Stroke | 4.331x4.921 inches [110 x 125 mm] |
| Starter volts | 12 |
| Torque RPM | 1400 |
| Rated RPM | 2200 |
| Compression | 16:1 |
| Power | 80 hp [59.7 kW] |
Transmission Information of Belarus, MTZ-80Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Gears | 18 forward and 4 reverse |
|---|---|
| Clutch | Dry disc |
Mechanical Specs of Belarus, MTZ-80Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Cab standard. |
| Disc brakes |
| Steering | Power assist |
|---|
Power Information of Belarus, MTZ-80Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO Type | 540/1000/ground |
|---|
Hydraulics Specifications of Belarus, MTZ-80
Hydraulic system type, pressure, pump flow and valves.
| Capacity | 5.6 gal [21.2 L] |
|---|---|
| Pressure | 2321 psi [160.0 bar] |
| Total flow | 13.2 gpm [50.0 lpm] |
Three-Point Hitch of Belarus, MTZ-80
Hitch category and rear/front lift capacity.
| Rear lift | 4,410 lbs [2000 kg] |
|---|
Frequently asked questions
How much horsepower does the Belarus MTZ-80 have?
The Belarus MTZ-80 delivers 80 HP.
What years was the Belarus MTZ-80 produced?
The Belarus MTZ-80 was produced in 1975-1977.
What engine does the Belarus MTZ-80 have?
The Belarus MTZ-80 is powered by a Diesel, 4-cylinder engine.
How much does the Belarus MTZ-80 weigh?
The Belarus MTZ-80 weighs 7,840 lbs [3556 kg].
Is the Belarus MTZ-80 4WD?
The Belarus MTZ-80 is available in 2WD.