
Branson 2205h
Power
21 hp
Production
2020+
Engine
Diesel, 3-cylinder
Transmission
Hydrostatic
Weight
1433 lbs [650 kg]
Drive
4WD
From the same series:
Introduction
Production Information of Branson, 2205h
The production information of the tractor (2205h) includes details about its manufacturing.
| Compact Utility tractor |
| Built in South Korea |
| Manufacturer | Branson (a part of Kukje) |
|---|
Dimension and Tires Information of Branson, 2205h
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 53.1 inches [134 cm] |
|---|---|
| Weight | 1433 lbs [650 kg] |
| Height (ROPS) | 86.6 inches [219 cm] |
| Length | 94.2 inches [239 cm] |
| Ground clearance | 8.3 inches [21 cm] |
| Width | 44.5 inches [113 cm] |
| Lawn/turf front | 18x8.50-10 |
|---|---|
| Industrial rear | 26x12.00-12 |
| Lawn/turf rear | 26x12.00-12 |
| Industrial front | 18x8.50-10 |
Engine Specifications of Branson, 2205h
Get the specifications for the engine and if different options are available.
| Yanmar 3TNM74F |
| Liquid-cooled inline |
| Diesel |
| 3-cylinder |
| Emissions | Tier IV |
|---|---|
| Displacement | 60.6 ci [1.0 L] |
| Power (gross) | 21.5 hp [16.0 kW] |
| Bore/Stroke | 2.91x3.03 inches [74 x 77 mm] |
| Rated RPM | 3200 |
| Fuel system | Indirect injection |
Transmission Information of Branson, 2205hY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Hydrostatic |
|---|---|
| Gears | Infinite forward and reverse (2-range) |
Mechanical Specs of Branson, 2205hY
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Two-post folding ROPS. |
| Wet disc brakes |
| Power steering |
| Differential lock | Mechnanical rear |
|---|
Power Information of Branson, 2205hY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540 (1.375) |
| Mid PTO Type | 2500 |
Hydraulics Specifications of Branson, 2205h
Hydraulic system type, pressure, pump flow and valves.
| Rear valves | 2 OptOptional |
|---|---|
| Steering flow | 2.1 gpm [7.9 lpm] |
| Pump flow | 4.2 gpm [15.9 lpm] |
| Total flow | 6.3 gpm [23.8 lpm] |
Three-Point Hitch of Branson, 2205h
Hitch category and rear/front lift capacity.
| Rear Type | I |
|---|---|
| Rear lift (at 24"/610mm) | 679 lbs [307 kg] |
| Control | Position control |
| Rear lift (at ends) | 1100 lbs [498 kg] |
Electrical System of Branson, 2205h
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Charging system | Alternator |
| Charging amps | 40 |
Frequently asked questions
How much horsepower does the Branson 2205h have?
The Branson 2205h delivers 21 HP.
What years was the Branson 2205h produced?
The Branson 2205h was produced in 2020+.
What engine does the Branson 2205h have?
The Branson 2205h is powered by a Diesel, 3-cylinder engine.
What transmission does the Branson 2205h use?
The Branson 2205h uses a Hydrostatic transmission.
How much does the Branson 2205h weigh?
The Branson 2205h weighs 1433 lbs [650 kg].
Is the Branson 2205h 4WD?
The Branson 2205h is available in 4WD.