Introduction
Production Information of Branson, 2910i
The production information of the tractor (2910i) includes details about its manufacturing.
| Compact Utility tractor |
| Built in Yangsu-ri, South Korea |
| Manufacturer | Branson |
|---|
Dimension and Tires Information of Branson, 2910i
This section sums up the dimension and tires information of the tractor.
| Front tread | 44.6 inches [113 cm] |
|---|---|
| Wheelbase | 65 inches [165 cm] |
| Weight | 3640 lbs [1651 kg] |
| Height | 95 inches [241 cm] |
| Length | 120 inches [304 cm] |
| Rear tread | 42.5 to 57.3 inches [107 to 145 cm] |
| Ground clearance | 11.2 inches [28 cm] |
| Width | 59 inches [149 cm] |
| Industrial front | 10-16.5 |
|---|---|
| Ag front | 7-16 |
| Industrial front | 27x8.50-15 |
| Lawn/turf rear | 41x14.00-20 |
| Ag rear | 12.4-24 |
| Industrial rear | 420/70-24 |
| Industrial rear | 15x19.5 |
| Lawn/turf front | 27x8.50-15 |
Engine Specifications of Branson, 2910i
Get the specifications for the engine and if different options are available.
| Kukje |
| Liquid-cooled |
| Diesel |
| 3-cylinder |
| Oil capacity | 3.17 qts [3.0 L] |
|---|---|
| Displacement | 89 ci [1.5 L] |
| Compression | 21.2:1 |
| Bore/Stroke | 3.307x3.465 inches [84 x 88 mm] |
| Starter volts | 12 |
| Rated RPM | 2600 |
| Power | 29 hp [21.6 kW] |
Transmission Information of Branson, 2910iY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Transmission | Synchromesh |
|---|---|
| Gears | 12 forward and reverse |
| Oil capacity | 37 qts [35.0 L] |
Mechanical Specs of Branson, 2910iY
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Two-post ROPS. |
| Wet disc brakes |
| Steering | Hydrostatic power |
|---|
Power Information of Branson, 2910iY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Live , independent optional (2-stage clutch) |
|---|---|
| Rear PTO Type | 540/1000 |
Hydraulics Specifications of Branson, 2910i
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Total flow | 13.2 gpm [50.0 lpm] |
| Pump flow | 8.9 gpm [33.7 lpm] |
| Capacity | 9.25 gal [35.0 L] |
| Valves | 1 to 3 |
Three-Point Hitch of Branson, 2910i
Hitch category and rear/front lift capacity.
| Rear Type | I |
|---|---|
| Rear lift | 2580 lbs [1170 kg] |
Electrical System of Branson, 2910i
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Charging amps | 45 |
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the Branson 2910i have?
The Branson 2910i delivers 29 HP.
What years was the Branson 2910i produced?
The Branson 2910i was produced in 2005-2009.
What engine does the Branson 2910i have?
The Branson 2910i is powered by a Diesel, 3-cylinder engine.
What transmission does the Branson 2910i use?
The Branson 2910i uses a Synchromesh transmission.
How much does the Branson 2910i weigh?
The Branson 2910i weighs 3640 lbs [1651 kg].
Is the Branson 2910i 4WD?
The Branson 2910i is available in 4WD.