Introduction
Production Information of Branson, 3110i
The production information of the tractor (3110i) includes details about its manufacturing.
| Built in Yangsu-ri, South Korea |
| Distributor | Branson |
|---|---|
| Manufacturer | Kukje |
Dimension and Tires Information of Branson, 3110i
This section sums up the dimension and tires information of the tractor.
| Front tread | 44.6 inches [113 cm] |
|---|---|
| Wheelbase | 65 inches [165 cm] |
| Weight | 3,735 lbs [1694 kg] |
| Height (ROPS) | 95 inches [241 cm] |
| Length | 119 inches [302 cm] |
| Rear tread | 42.5 to 57.3 inches [107 to 145 cm] |
| Ground clearance | 11 inches [27 cm] |
| Width | 55 inches [139 cm] |
No data available
Engine Specifications of Branson, 3110i
Get the specifications for the engine and if different options are available.
| Diesel |
| 3-cylinder |
| Liquid-cooled |
| Pre-heating | Block heater (optional) |
|---|---|
| Power (gross) | 31 hp [23.1 kW] |
| Displacement | 95.32 ci [1.6 L] |
| Rated RPM | 2600 |
| Air cleaner | Dry element |
| Starter type | Electric |
Transmission Information of Branson, 3110iY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Four synchronized gears in each of three ranges plus synchronized shuttle. |
| Type | Synchronized shuttle |
|---|---|
| Gears | 12 forward and reverse |
Mechanical Specs of Branson, 3110iY
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| ROPS. Canopy optional. Soft cab optional. |
| Wet disc brakes |
| Steering | Hydrostatic power |
|---|
Power Information of Branson, 3110iY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540/540E |
Hydraulics Specifications of Branson, 3110i
Hydraulic system type, pressure, pump flow and valves.
| Valves | 0 to 2 |
|---|---|
| Total flow | 8.4 gpm [31.8 lpm] |
Three-Point Hitch of Branson, 3110i
Hitch category and rear/front lift capacity.
| Rear Type | I |
|---|---|
| Rear lift (at ends) | 2,140 lbs [970 kg] |
Frequently asked questions
How much horsepower does the Branson 3110i have?
The Branson 3110i delivers 31 HP.
What years was the Branson 3110i produced?
The Branson 3110i was produced in 2008-2018.
What engine does the Branson 3110i have?
The Branson 3110i is powered by a Diesel, 3-cylinder engine.
What transmission does the Branson 3110i use?
The Branson 3110i uses a Synchronized shuttle transmission.
How much does the Branson 3110i weigh?
The Branson 3110i weighs 3,735 lbs [1694 kg].
Is the Branson 3110i 4WD?
The Branson 3110i is available in 4WD.