Introduction
Case IH Farmall 45 Compact Utility Tractor
The Case IH Farmall 45 is a compact utility tractor produced between 2008 and 2011. Manufactured by Shibaura in Dublin, Georgia, USA, this machine was designed for versatile agricultural and maintenance applications within the compact tractor segment.
Engine and Performance
The tractor is powered by a liquid-cooled, four-cylinder Shibaura N844L diesel engine. With a displacement of 2.2 liters (135.2 cubic inches) and a bore/stroke ratio of 84 x 100 mm, it delivers a gross power output of 45 hp (33.6 kW) at a rated engine speed of 2600 RPM. The engine utilizes glow plugs for pre-heating and a dual-stage air cleaner for sustained operation in dusty environments.
Transmission and Drivetrain
The Farmall 45 offers three distinct transmission configurations to suit operator preference and task requirements: a 12-speed Synchro Shuttle, a hydrostatic transmission with two ranges, and a mechanical Continuously Variable Transmission (CVT). The CVT system employs a steel chain between variable-diameter pulleys and provides three speed modes with variable reactivity. All models feature four-wheel drive and wet disc brakes for enhanced traction and stopping reliability.
Hydraulics and PTO
The hydraulic system is of the open-center type, providing a total flow of 14.9 gpm (56.4 lpm). This is split into 9.8 gpm (37.1 lpm) for implement operation and 5.1 gpm (19.3 lpm) dedicated to the hydrostatic steering system. The rear Category I three-point hitch offers position control and a lift capacity of 2,330 lbs (1,056 kg) measured at 24 inches behind the lift point. The rear PTO is independent and operates at 540 RPM, with an optional mid-PTO available for hydrostatic and CVT-equipped units.
Operator Environment and Dimensions
The tractor is available with either a two-post foldable Rollover Protective Structure (ROPS) or an optional factory cab equipped with air conditioning. It features a wheelbase of 73.5 inches and a minimum width of 66.6 inches. Various tire configurations were offered from the factory, including agricultural, industrial, and lawn/turf options to accommodate specific terrain needs.
Conclusion
The Farmall 45 serves as a robust compact utility solution, balancing technical flexibility—through its varied transmission choices—with the power necessary for small-to-medium scale agricultural tasks, landscaping, or property maintenance.
Production Information of CaseIH, Farmall 45
- Built in Dublin, Georgia, USA
- Compact Utility tractor
| Distributor | CaseIH |
|---|---|
| Original price | $25,677 (2011 shuttle ROPS ) |
| Manufacturer | Shibaura |
| Manufacturer(optional) | $30,477 (2011 hydro ROPS ) |
Dimension and Tires Information of CaseIH, Farmall 45
| Rear tread | 51.2 to 67.4 inches [130 to 171 cm] |
|---|---|
| Wheelbase | 73.5 inches [186 cm] |
| Height (cab) | 90.79 inches [230 cm] |
| Height (ROPS) | 95 inches [241 cm] |
| Length | 125.2 inches [318 cm] |
| Front tread | 49.3 inches [125 cm] |
| Width | 66.6 inches (min) [169 cm] |
| Industrial front | 10-16.5 |
|---|---|
| Ag front | 8-16 |
| Lawn/turf rear | 44x18-20 |
| Lawn/turf rear(optional) | 27/12LLx15 |
| Ag rear | 14.9-24 |
| Industrial rear | 17.5x24 |
| Industrial rear(optional) | 22.5LLx16.1 |
| Lawn/turf front | 27x10.50-15 |
Engine Specifications of CaseIH, Farmall 45
- Shibaura N844L
- Liquid-cooled
- Diesel
- 4-cylinder
| Starter volts | 12 |
|---|---|
| Displacement | 135.2 ci [2.2 L] |
| Air cleaner | Dual stage |
| Bore/Stroke | 3.307x3.937 inches [84 x 100 mm] |
| Rated RPM | 2600 |
| Pre-heating | Glow plugs |
| Power (gross) | 45 hp [33.6 kW] |
Transmission Information of CaseIH, Farmall 45
Transmission variants 1
| Transmission | Synchro Shuttle |
|---|---|
| Gears | 12 forward and reverse |
Transmission variants 2
| Type | Hydrostatic |
|---|---|
| Gears | Infinite forward and reverse (2-range) |
Transmission variants 3
- The mechanical CVT uses a steel chain between variable-diameter pulleys. Three speed modes (low, medium, high) with variable reactivity. Left-hand shuttle lever.
| Transmission | CVT |
|---|---|
| Type | Continuously variable transmission |
| Gears | Infinite forward and reverse |
- 12-speed
- Hydrostatic
- Continuously variable transmission
Mechanical Specs of CaseIH, Farmall 45
- Four-wheel drive
- Two-post foldable ROPS. Cab optional with air-conditioning.
- Wet disc brakes
| Steering | Hydrostatic power |
|---|
Power Information of CaseIH, Farmall 45
| Rear PTO | Independent |
|---|---|
| Mid PTO Type | 2000 |
| Rear PTO Type | 540 |
| Mid PTO | Optional with hydro/CVT |
Hydraulics Specifications of CaseIH, Farmall 45
| Type | Open center |
|---|---|
| Steering flow | 5.1 gpm [19.3 lpm] |
| Pump flow | 9.8 gpm [37.1 lpm] |
| Total flow | 14.9 gpm [56.4 lpm] |
Three-Point Hitch of CaseIH, Farmall 45
| Rear Type | I |
|---|---|
| Rear Type(optional) | 2,800 lbs (CVT) [1270 kg] |
| Control | Position control |
| Rear lift (at 24"/610mm) | 2,330 lbs [1056 kg] |
Electrical System of CaseIH, Farmall 45
| Battery volts | 12 |
|---|---|
| Ground | Negative |
| Ground(optional) | 75 (cab optional) |
| Ground(optional) | 55 (cab) |
| Charging system | Alternator |
| Battery CCA | 600 |
| Charging amps | 40 (ROPS) |
Where it sits
With 45 HP, the CaseIH Farmall 45 sits between Farmall 40 (40 HP) and Farmall 50 (50 HP) in CaseIH's range. Its power puts it in the 30th percentile of 2000s models in our database (2822 machines).
Frequently asked questions
How much horsepower does the CaseIH Farmall 45 have?
The CaseIH Farmall 45 delivers 45 HP.
What years was the CaseIH Farmall 45 produced?
The CaseIH Farmall 45 was produced in 2008-2011.
What engine does the CaseIH Farmall 45 have?
The CaseIH Farmall 45 is powered by a Diesel, 4-cylinder engine.
What transmission does the CaseIH Farmall 45 use?
The CaseIH Farmall 45 uses a Synchro Shuttle transmission.
Is the CaseIH Farmall 45 4WD?
The CaseIH Farmall 45 is available in 4WD.